GB 17691-2005
National Standard of the People's Republic of China
Limits and Measurement Methods for Exhaust Pollutants
pression Ignition and Gas Fuelled Positive Ignition Engines of
Vehicles (III, IV, V)
Replace of GB 17691-2001
Replace of part of GB 14762-2002
1. SCOPE
This standard stipulates limits and measurement method for gaseous and particulate pollutants
from exhaust gas pression ignition (.) engines for road vehicle use and vehicles
equipped with . engines, and for gaseous pollutants from motor vehicles equipped with
positive ignition engines fuelled with natural gas (NG) or liquefied petroleum gas (LPG) and
such engines.
This standard applies to the . engines (including positive ignition engines fuelled with gaseous
fuel) used for driving motor vehicles of categories of M2, M3, N1, N2 and N3 having a design
speed exceeding 25 km/h and vehicles of categories M1 having a total mass exceeding 3500 kg,
and to the type approval, the inspection of conformity of production and the inspection of
conformity of in-service vehicles.
This standard dose not apply to the . engines used by category N1 and M2 power driven
vehicles which are approved according to GB -2005 Limits and measurement methods
for emissions from light-duty vehicles (III, IV).
2. NORMATIVE REFERENCE
The following standards contain provisions, which, through reference in this text, constitute
provisions of this standard. For undated references, the latest edition of the document referred to
applies.
GB/T 15089-1994 Motor Vehicles and Trailers—Classification
GB/T 17692 Measurement Methods Power for Automotive Engines
GB 18047 pressed Natural Gas
GB -2005 Limits and measurement methods for emissions from light-duty vehicles (III,
IV)
GB/T19147 Automotive Diesel
GB19159 Automotive Liquefied Petroleum Gas
3. TERMS AND DEFINITIONS
For the purposes of this Standard, following terms and
GB 17691-2005标准(英文版) 来自淘豆网www.taodocs.com转载请标明出处.