摘要
本次毕业设计的课题为遥控器底壳的注射成型模具设计,主要从遥控器底壳材料特性、成型性能及遥控器底壳的形状、型腔结构等多角度详细分析了遥控器底壳注塑加工工艺性。因产品为大批量生产,且零件体积较大、结构较为简单,故采用“一模2件”的生产方式。初步选择注塑机的型号和规格,分析遥控器底壳结构及生产方式宜采用单分型结构,对浇注系统、成型零部件、导向及定位机构、脱模机构、冷却系统、模架各部件零件都进行了相关的计算和选择。最后,在参照遥控器底壳的体积、重量等参数后对注塑机的相关主要参数进行校核,以判断所选的注塑机能否满足注塑要求。
关键词:注射成型,一模两件,单分型面,注塑机
ABStract
The graduation design subject to cover the injection molding design, mainly from the plastic material characteristics, forming performance and plastic parts, die-cavity structure is analyzed in detail from multiple perspectives, such as plastic injection molding process technology. Because there is no batch production requirements, and small parts, simple structure, a mold piece of the means of production. Preliminary selection of type and specification, injection molded parts structure analysis and production mode, appropriate USES double type structure, gating system, forming parts, orientation and positioning and demoulding mechanism, cooling system, ponents parts are made of calculation and choice. Finally, in the reference of the volume, weight after injection parameters such as the main parameters related to test to determine whether meet the selected injection molding requirements.
Key words:Injection molding; Mold One; Duplex profile; Injection molding machine;
目录
第一章绪论 - 7 -
第二章遥控器底壳的工艺性分析 - 9 -
遥控器底壳的原材料分析 - 9 -
成型特性及条件 - 9 -
遥控器底壳的结构和尺寸精度及表面质量分析 - 10 -
- 10 -
- 11 -
- 11 -
计算遥控器底壳的体积和重量 - 11 -
最大注射量的校核 - 11 -
注射压力的校核 - 12 -
开模行程相关尺寸校核 - 12 -
锁模力的校核 - 13 -
第三章初选注射成型机的型号和规格 - 14 -
注射成型机的型号和规格 - 14 -
遥控器底壳注射工艺参数的确定 - 15 -
第四章注射模的结构设计 - 16 -
分型面的选择 - 16 -
确定型腔数目及排列方式 - 17 -
浇注系统设计 - 17 -
- 18 -
- 18 -
- 19 -
- 19 -
成型零件结构设计 - 19 -
- 20 -
- 21 -
导向及定位机构设计 - 22 -
- 22 -
- 23 -
脱模机构设计 - 23 -
- 23 -
-
塑料模具设计及三维建模(遥控器)(含全套CAD图纸) 来自淘豆网www.taodocs.com转载请标明出处.