操作步骤: 1, 定义工作文件名,执行 Utility Menu>change jobname 命令,输入 shaft1 并选择[new log and error files] 复 选框, 单击 ok 按 钮。 2, 定义工作标题,执行 Utility Menu>file>change title 命令,弹出[change title] 对话框。输入“ the shaft model ”, 单击 OK 按钮。 3, 显示工作平面,执行 Utility Menu>workplane>display working plane 命令。 4, 关闭三角坐标符号, Utility Menu>plotctrls>window controls>window options 命令,弹出[window options] 对话框。在[location of triad] 下拉列表框中选择” not shown ”选项,单击 OK 按钮。 5, 生成矩形面, 执行 main menu>preprocessor>modeling>create>areas>rectangle>by dinebsions 命令, 弹出[create rectangle by dimensions] 对话框。在文本框中输入矩形坐标, (0, 30)(0, ), apply 按钮为继续下一个面,( 30, 165 )(0, 30),( 165 , 1483 ) (0, 50),( 1483 , 1533 )(0, ),( 1533 , 1583 )(0, 50),( 1583 , 1633 )(0, ), ( 1633 , 1636 )(0, ),( 1636 , 1689 )(0, ),( 1689 , 1754 )(0, 30),( 1754 , 1803 )(0, ),( 1803 , 1928 )(0, ) 。单击 OK 按钮 6, 生成倒角, 先生成圆角, 执行 Main Menu>preprocessor>Modeling>Create>Lines>Line Fille t 命令, 弹出对话框, 拾取第一个有倒角的两边线, 单击“ Apply ”按钮, 弹出[Line Fillet] 对话框, 输入 RAD=2, 单击“ Apply ”按钮, 然后重复上述操作, 对所有有倒角的都进行圆角,单就“ OK ”按钮,然后执行 Main Menu>preprocessor>Modeling>Create> Lines> , 把 刚才的圆角连线, 如图所示: 7, 生成面:执行 Main Menu>preprocessor>Modeling>Create>Areas>Arbitrary>By Line s 命令, 拾取所有的小三角形的三条边, 单击“ OK ”按钮 8, 面 相减: 执 行 main menu>preprocessor>modeling>operate>booleans> add >areas 9, 矩形面相加, 执行 main menu>preprocessor>modeling>operate>booleans>add>areas 命令, 主 轴的各个矩形面分别相加。 10, 由 面绕
有限元 来自淘豆网www.taodocs.com转载请标明出处.