MATERIAL or METHODS Specification NO. PQE-110 TITLE : iDEN ALT 2K5/CALT2K5 TEST PROCEDURE REVISION DATE : 4-28-06 MEMO: ISSUE: B Page -1- of 23 _______________________________________________________________________________________________________________________________________________________ The information contained in this document is PROPRIETARY to Motorola Inc. and shall not be reproduced or used in part or whole without Motorola ’s written consent. UNCONTROLLED COPY Signatures on File Gregory Brookes Quality Assurance Manager Date German Malaret ALT Supervisor Date Stuart Warszycki Document Control Date Revision History Issue Date Revised By Description of Revision O 11/5/04 Stuart Warszycki Changed Specification number from 0009188T25 to PQE-110 to incorporate major changes to test flow. Modified Drop sections to reflect change to4 foot drop height at room temperature. Removed Mechanical Leg of testing. Created new numbering scheme for environmental testing leg. Updated document sections to tailor to iDEN requirements. A 11/11/2005 Stuart Warszycki Created drop schedule table in Appendix F. Added information for Blue Tooth and EMI testing in sections , , and . Modified ESD section for pliance. Added radio orientation information for first and second shaker table vibration in and . Added ESD replacement radios in and . Several syntax errors corrected. B 4/28/2006 Stuart Warszycki Changed ESD Section , as per Mobile Devices CR 2006- of4 ESD units tested in standby, while other 2 are tested in a call while connected toa power source. Updated Section with similar criterion for ESD#2. MATERIAL or METHODS Specification NO. PQE-110 TITLE : iDEN ALT 2K5/CALT2K5 TEST PROCEDURE REVISION DATE : 4-28-06 MEMO: ISSUE: B Page -2- of 23 _______________________________________________________________________________________________________________________________________________________ The information contained