2DS(Y)—10/6型电动往复泵 摘要 该毕业设计是对2DS(Y)—10/6型电动往复泵的设计。往复泵是借助于活塞在液缸工作腔内的往复运动,使工作腔容积产生周期性变化来达到输送液体的目的,它是把机械能转化为压力能的装置。此种泵的流量只取决于工作腔容积变化值及在单位时间内的变化次数(频率),而在理论上与排出压力无关。本次设计通过对已知数据的分析以及参考相关资料完成的,该系列电动往复泵系双缸双作用泵,主要由液缸体和传动部分组成。对其活塞、泵阀等零部件进行具体的分析和计算,完成了本次设计的任务。 关键词:电动往复泵;泵阀;活塞;设计 The design of 2DS (Y) -10 / 6 electric reciprocating pump Abstract This graduation project is to the 2DS(Y) - 10/6 electrically operated reciprocating pump design. The reciprocating pump is drawssupport the piston in fluid cylinder work cavity reciprocal motion,causes the work cavity volume to have the periodic variation toachieve the transportation liquid the goal, it is transforms themechanical energy as the fluid pressure energy installment. This kindpumps the current capacity is only decided by the work cavity volumechange value and in the unit time change number of times (frequency),but in theoretically has nothing to do with with the deliverypressure. This design pletes to the known data analysis aswell as the reference correlation data, this series electricallyoperated reciprocating pump is the two-cylinder double-acting pump,mainly partially posed by the fluid cylinder body and thetransmission. To its spare part and so on piston, pump valve carrieson the concrete analysis and putation, pleted thisdesign task. Key word :Electrically operated reciprocating pump;Pump valve;Piston;design 目录 绪论 1 第一章概述 2 第一节往复泵的结构和工作原理 2 第二节往复泵的特点和分类 4 第三节往复泵的应用与发展 7 第二章往复泵的总体设计 10 第一节泵型及总体结构形式选择 10 第二节液力端结构形式的选择 11 第三章 2DS(Y)-10/6型电动往复泵的设计 14 第一节主要结构参数的选择与确定 14 第二节原动机的选择 19 第四章液力端主要零部件设计 22 第一节液缸体 22 第二节泵阀设计 23 第三节活塞、活塞杆、活塞环 27 结束语 40 参考文献 41 外文资料 42 中文翻译 49