(一)硬盘分区情况
bash-# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 1563 alt 2 hd 255 sec 63>
/******@0,0/pci15ad,******@10/******@0,0
1. c2t0d0 <DEFAULT cyl 1020 alt 2 hd 64 sec 32>
/******@0,0/pci15ad,******@11/pci15ad,******@4/******@0,0
2. c2t1d0 <DEFAULT cyl 1020 alt 2 hd 64 sec 32>
/******@0,0/pci15ad,******@11/pci15ad,******@4/******@1,0
3. c2t2d0 <DEFAULT cyl 1020 alt 2 hd 64 sec 32>
/******@0,0/pci15ad,******@11/pci15ad,******@4/******@2,0
4. c2t3d0 <DEFAULT cyl 4092 alt 2 hd 128 sec 32>
/******@0,0/pci15ad,******@11/pci15ad,******@4/******@3,0
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 1563 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 352 - 1562 (1211/0/0) 19454715
1 swap wu
安装过程完整记录(一) 来自淘豆网www.taodocs.com转载请标明出处.