ViaAqua UTC Modular Canister Filter Standard and UV Model Parts list: Valve and tap connectors Pump lid Units with UV-C replace part #3 UV-C PL light bulb Quartz Sleeve and reaction chamber Priming plunger Pump lid O ring Impeller Impeller well cover Pump lid intake tube only on units without UV gasket media container white filter pad coarse black sponge discharge tube/media container latches Canister intake prime/U tube Priming cap surface skimmer intake tube intake strainer Output prime/U tube Output coupler Output elbows Spray bar Suction cups Spray bar cap Tubing Important: Do not deviate from the Safeguards and safety Before installation of a ViaAqua™ Canister filter, read and follow these important safeguards and safety guidelines. Do not operate ViaAqua® canister filter without water. Doing so can cause permanent damage to the canister filter. Carefully check the canister filter after installation to ensure that the canister filter and the tubing connecting the canister to the aquarium are not wet. Prior to maintenance on any electrical aquarium appliance or maintenance to the aquarium, you must disconnect all electrical aquarium devices. Only use the canister filter for it intended use. Do not plug into an extension cord. Plug only directly to a GFCI outlet Verify that tubes and the canister filter are not in con
Viaaqua UTC canister filterviaaqua UTC筒过滤器 来自淘豆网www.taodocs.com转载请标明出处.