Use MANUAL Type.
THE FIRST STEP :Modify IP Address on DSLAM
username:SUPERUSER
password:ANS#150
order to confirm the DSLAM belonging to work point, you should
check IP Address at firstly.
RTRV-IPPORT Check IP Address
RTRV-ATMARPENT Check AWS IP Address
RTRV-NE work Element Address
IP Address set secondly
SET-NE Choose "None"
DLT-ATMARPENT Input IP Address route to 7411(old) you want to delete
DLT-IPPORT Execute directly
new IP Address finally
ENT-IPPORT Input IP Address and Mask
ENT-ATMARPENT Input IP Address route to 8750(new)
SET-NE Input IP Address route to 8750(new)
the new IP address you should discuss with the staffs of XingYu .
THE SECOND STEP:
After these steps finish, you will "ping" the new IP address on the new
SUN work station. If essfully, the following steps you should do, otherwise problem must exist.
the HD subrack;
NT, LT, Alarm board in the subrack ( don't need to create the user again, because the data are save in the ASAM, not in the sun work
[电信]alcatel分宜割接扩容步骤 来自淘豆网www.taodocs.com转载请标明出处.