美国公司的模具设计细节指导（中英文）.docx

模具英语
美国公司的模具设计细节指导(中英文)
I. Purpose 目的
A. The purpose of this metal stamping die standard is to provide detailed instructions for use in the design, construction, and testing of all metal stamping dies supplied to the Su-dan Corporation
本份模具标准是向所有提供给Su-dan公司的五金模具的设计、组立、试模提供细节指导。
1. Su-dan requires die(s) to produce finished parts that conform to:
Su-dan要求模具制造的产品应与以下保证一致:
The part drawing.
产品图面
b. Including geometric dimensioning and tolerancing.
形状尺寸及公差
c. Requirements for first parts approval process.
首件承认程序要求
2. This standard and the specifications referenced herein are issued to:
本标准是应用:
a. Define the general classifications of metal stamping dies for Su-dan.
定Su-dan五金模具分类
Reduce the dies design and build costs by:
通过以下条款降低模具设计及组立成本
(1) Standardization of design, which will decrease review time and expense.
设计标准化将降低审图时间及成本
(2) mercially available ponents.
使用标准件
the safety of Su-dan personnel.
确保Su-dan员工安全
d. Promote superior tool design and consistent die making practices.
提升模具设计能力及协调模具制造****惯
II. Scope
A. All metal stamping dies supplied to Su-dan ply with the requirements specified herein and as stated in the die design and construction data sheets.
所有供应给Su-dan的铁件模具必须遵守这份指定的及在模具设计及组装表册里规定的要求
III. Die Classifications
模具级别
A. All dies will be constructed for inter-changeability of perishable die blocks, punches, retainers, die buttons, and pilots.
模具需保证易坏的镶快、冲头、固定器、引导冲组装的易换性。
B. Die material requirements: 模具材质要求
ponent Description模具组件名称 Die Material Type材质种类
Die steel 模板 D2 or better
Filler steel 导料板 HRS/CRS
Buttons 镶件 M-2
Pilots 引导冲 M-2
Punches 冲头 M-2
Buttons & punch retainers 镶件及冲头固定装置 A2, 6150,
- 4140 steel - hardened
Pressure pads 压料垫板 6150 or 4140 steel -hardened (See , S-16)
Stripper windows 脱料板快拆窗口 6150, 4140 or 0-1 steel hardened
- (See p. 17, S-16)
Form steel 成型 D2 or better
In any application where Su-dan is stamping a high strength or high carbon material the use of CPM-4, C