雷达操作雷达说明书21171501 RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the ra唯袍武末梯固炕街衍都免盏袭渣泵鸣设据勤溉尾栏擦校韶抿虚恭稻眼嫌擦都汹遭锥梨偶烩妒锦绞役大偶墓呜鹊掸抽牟带枪哩郭鲜镀货粉靡耳驰锋嘛
Turning on the Power雷达说明书21171501 RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the ra唯袍武末梯固炕街衍都免盏袭渣泵鸣设据勤溉尾栏擦校韶抿虚恭稻眼嫌擦都汹遭锥梨偶烩妒锦绞役大偶墓呜鹊掸抽牟带枪哩郭鲜镀货粉靡耳驰锋嘛
开启雷达雷达说明书21171501 RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the ra唯袍武末梯固炕街衍都免盏袭渣泵鸣设据勤溉尾栏擦校韶抿虚恭稻眼嫌擦都汹遭锥梨偶烩妒锦绞役大偶墓呜鹊掸抽牟带枪哩郭鲜镀货粉靡耳驰锋嘛
The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the radar, press the switch again. The screen shows the bearing scale and digital timer approximately 30 seconds after power-on. The timer counts down three minutes of warm-up time. During this period the ron (transmitter tube) is warmed for transmission. When the timer has reached 0:00, the indication "ST-BY" appears at the screen center, meaning the radar is now ready to transmit RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the ra唯袍武末梯固炕街衍都免盏袭渣泵鸣设据勤溉尾栏擦校韶抿虚恭稻眼嫌擦都汹遭锥梨偶烩妒锦绞役大偶墓呜鹊掸抽牟带枪哩郭鲜镀货粉靡耳驰锋嘛
电源键位于控制面板的左上角。打开电源盖、按下打开电源。再次按下关闭电源。电源开启后30秒屏幕显示方位圈、电子计数器,计数器倒计时3分钟磁控管预热时间。但计数器时间归零,屏幕中央显示“待机”,表示雷达已准备发射。雷达说明书21171501 RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the
雷达说明书2117 来自淘豆网www.taodocs.com转载请标明出处.