毕业设计（论文）-电子钟后盖注塑模具设计（全套CAD图纸）.doc

电子钟后盖注塑模具设计
材料成型及控制工程作者:X 指导老师:X
全套CAD图纸,联系153893706
【摘要】本文介绍了注射模具的特点及发展趋势,叙述了电子钟后盖注射模具设计与计算的详细过程,介绍了该塑件的成型工艺、注射模具的结构特点与工作过程, 阐述了在有斜滑块抽芯的注射模设计中应注意的事项。在对电子钟后盖的模具设计过程中,本设计主要设计要点如下:塑件的设计比较的合理;分型面的选择有利于塑件成型;脱模机构的设计不但结构简单,而且脱模动作稳定可靠;进浇口的选择不影响塑件外观,而且保证塑件充填均匀;冷却水道的设计使模具效率达到最高,保证塑件质量要求;在设计的过程中借用分析软件如CAM等使设计更合理、更有效;大量使用标准件,使模具制作成本大大降低;本模具设计最关键的一点就是设计已达到实际生产的要求。
【关键词】电子钟;注射模;分型面;斜滑块;侧抽芯;脱模机构。
Design of the Injection Mould for The Back of Electronic Clock
Major:Material processing and control engineering
Author:
Directing teacher:
Abstract The characteristics and developments of injection mould were introduced in this paper. The designing and calculating of injection mould for the back of electronic clock were stated in detail. The forming process of the product and the structure characteristics as well as working process of the injection mould were introduced .The points must be paid attention to in the design of the injection mould for the part with lifters were the process of the designing of the injectinon mould for electronic clock receiver, people should pay attention to several suggestions: the plastic should be designed as reasonable as possible. The selection of the sub-type parts are benificial  to mold the parts of plastic. The design of the  structure of drawing of pattern is not only simple but also the movement should be stable and reliable. The selection of Jin runner should ensure to fill the plastic equally under the prerequisite of not influencing the appearance of the plastic. The design of cooling penstock should make the rate of production reach to the topmost, and ensure any influence to do nothing to the equality of the plastic. Meanwhile, in the process of designing ,we can use analysis soft, such as
CAM, to make the design been more reasonable  and efficient. Making full use of  large amounts of standard pieces will reduce the cost of mold plastic facture. The key point of the design of mold plastic have reached the request of