下载此文档

组合机床铣边机设计毕业设计论文doc.doc


文档分类:汽车/机械/制造 | 页数:约25页 举报非法文档有奖
1/25
下载提示
  • 1.该资料是网友上传的,本站提供全文预览,预览什么样,下载就什么样。
  • 2.下载该文档所得收入归上传者、原创者。
  • 3.下载的文档,不会出现我们的网址水印。
1/25 下载此文档
文档列表 文档介绍
摘要
铣边机的设计根据方案的特点,来设定、选定基本参数。本方案机械结构的特点是需求加工典型零件而设计的,它与传统的组合铣不同而创新的一套特殊结构,但它能满足用户的加工需要。本产品是按用户要求而设计的,用户讨论合格后,投入生产,希望指导、鉴定。
设计机械加工工艺规程遵循如下原则[1]:
可靠地保证零件图样上所有技术要求的实现。
必须能满足生产纲领的要求。
在满足技术要求和生产纲领要求的前提下,要求工艺成本最低,低耗节能。
尽量减轻工人的劳动强度,保障生产安全。维护环境卫生。
Abstract
Milling Machine Design according to the characteristics of the programme, to set, selected basic parameters. The programme structure is characterized by machinery for the processing needs of users of the typical design of the parts, with bination of traditional and innovative milling different set of special structure, but it can meet the processing needs of users.
This product is based on user requirements and design, the user discussion after passing the production, hope the guide, identified.
Design mechanical processing order to follow the following principles [1]:
1) design a reliable guarantee that all parts of the technical requirements to achieve.
2) must meet the requirements of the production program.
3) to meet the technical requirements and requirements of the production program, under the premise of the minimum requirements of cost, low energy.
4) minimize the labor intensity of workers, protection of production safety. Maintaining sanitation.
第一章前言
随着机床向高精、高速、高效、数控及多功能方向发展,出现了各种各样的机床,但在加工特定产品的时候仍然需要设计者针对这一产品的加工工艺来进行设计、制造。因此,设计了这台铣边机。本铣边机主要是根据用户特定工件,且符合用户要求而研究、设计的一台铣边机。
设计分四个部分来说明。第一部分是用户提出的要求。根据用户的具体要求,对所加工的产品有了深刻的认识。第二部分是加工方案,熟识被加工零件,以及用户所提出的一些具体的要求,就可以制定几种初步的加工方案,来满足用户提出要求的方法,比较几种方案选其最优者。第四部分确定机床的基本参数。根据基本参数设计有关部件、及外购件。

第二章设计要求
:
:铣边机。
:1台。
:用于U型槽轴焊接坡口的加工。
工艺条件和技术要求

注:图中带“*”号尺寸设备加工保证尺寸,。
:交流380/220V、50Hz.
:-.
:0度-60度
、制造原则和执行标准
、制造原则


***,但应考虑***的制造成本和互换性。
、夹紧形式不限,但要考虑工件装夹和工人操作的便利,以及切屑可能对装夹的影响,保证切削和切削精度的实现。
,避免切屑的飞溅。
,本着实用、可靠、经济、

组合机床铣边机设计毕业设计论文doc 来自淘豆网www.taodocs.com转载请标明出处.

相关文档 更多>>
非法内容举报中心
文档信息
  • 页数25
  • 收藏数0 收藏
  • 顶次数0
  • 上传人aidoc1
  • 文件大小0 KB
  • 时间2015-10-12