SAE split flange halves SAE flange clamp SAE split flange halves flat
Sae split flange
SAE closed flange SAE flat socket weld flange
Sae flange flat
SAE flange with 24° cone end SAE socket weld flange SAE weld on flange
Sae boss flange
SAE BSPP thread flange SAE NPT thread flange
Right-angle flange SAE elbow socket weld flange SAE elbow NPT thread flange
90 degree elbow
SAE elbow BSPP thread flange SAE elbow weld on flange Elbow flange with 24° cone
end
Elbow pump flange connection Elbow SAE flange adapter Pump flange connection
Sae flange adapter
SAE flange adapter
FV Three flange SFV Three flange Flange style
Sae flange
welding couplings
SAE ponents Welding couplings(90°)
Products Technical Note:
Suitable Standard: SAE J518C , JB/ZQ1487-97, ISO6162, ISO6164.
Working Pressure: Listed in the products data sheet, under normal working environment. ( Working Temperature: -20℃~ 90
℃).
Material: Welding products are made of S355J2G3 or C22 steel, others are made of C45 steel. Stainless steel flanges use AISI304
and AISI316.
Surface Treatment: Non-welding products adopt zinc planting with yellow chromate conversion coating (say, A3C craft). Zinc
Thickness≥8u, can reach ISO9227 standard.
===========================================================================================
产品技术说明
适用标准:SAE J518C , JB/ZQ1487-97, ISO6162, ISO6164 。
工作压力:通常工作环境下,产品的工作压力已在产品明细列表里列出。(工作温度:-20℃~ 90℃) 。
所用材料:涉及要求焊接的产品采用 Q345B 或 20#钢,不需要焊接的产品采用 45#钢,不锈钢法兰采用 AISI304 和
AISI316 。
表面处理:非焊接件产品采用镀锌并用黄色铬酸钝化的防锈工艺(通称为 A3C 工艺),锌层厚度≥8u,并且达到 ISO9227
标准。
SAE split flange halves
SAE 对开法兰分体 P 4
配用
Normal 尺寸单最大工
编号附件
Flange Measurement 重作压力
Type Accessories
Size. kg Kg/cm²
A B C D E F G H I K M unc
inch 30
SAE法兰 来自淘豆网www.taodocs.com转载请标明出处.