关于沥青混凝土路面表面的处治
摘要:在旧沥青混凝土路面铺设两油一布铺撒碎石矿料进行表面处治方法来提高旧沥青混凝土路面的防滑、防水、耐磨等性能,本文结合试验路段铺筑介绍了沥青混凝土路面表面处治施工工艺及施工质量控制。关键词:旧沥青混凝土路面;表面处治; 抗摩擦性能; 施工工艺[ abstract] this paper discusses that in the old asphalt concrete pavement, laying two oil and a cloth spreading gravel aggregate surface treatment method to improve the old asphalt concrete pavement skid resistance, waterproof, wear-resistant properties, combined with the test road paving , this paper introduces the asphalt concrete pavement surface treatment construction technology and construction quality control.
[ key words] old asphalt concrete pavement ;surface treatment ; anti friction performance; construction technology
中图分类号:tu74文献标识码:a 文章编号:2095-2104(2012),经评定分析后合格才能使用。
。
,签发材料验收单。。
,施工季节气温进行选择。
、,沥青罐或贮油池中贮存的温度宜于130
℃-180℃。
、使用及存放过程中应有良好的防水措施,应避免再用水或热管道蒸汽进入沥青池中。、破碎碎石、筛选砾石、破碎砾石和符合要求的矿渣等。
“沥青表面层用粗集料规格”的规定选用。
、干燥、无风化、无杂质、强度、耐磨耗性。,700m为一个试验路段,:a结构:sbs改性沥青+300g/m2长纤+(5-10)mm粒径碎石;b结构:sbs改性沥青+300g/m2短纤+(5-10)mm粒径碎石;c结构:sbs改性沥青+200g/m2长纤+(5-10) mm粒径碎石;d结构:sbs改性沥青+200g/m2短纤+(5-10)mm粒径碎石。①沥青材料。沥青表面处治沥青材料要求渗透性好、凝结时间短、良好的粘结力、便于浇洒和施工、耐
沥青混凝土路面表面的处治 来自淘豆网www.taodocs.com转载请标明出处.