淮安信息职业技术学院毕业论文题目PWM直流调速系统的设计 学生姓名娄猛学号41012128系部电气工程系专业电气自动化技术班级410121指导教师王继凤顾问教师秦德良 二〇一四年十月摘 要PWM直流脉宽调速系统,以控制电路为核心,采用恒频脉宽调制控制方案,由SG3525,LM1413以及两个脉冲变压器构成了PWM信号的产生与驱动。其中SG3525产生的脉宽调制信号作为IGBT的驱动信号,而第11,14引脚输出信号经LM1413放大后再驱动IGBT,主电路中采用两个IGBT构成的半桥型结构,可看成一个降压变换器和一个升压变换器电路的组合,使其实现无静差的转速闭环控制。实现电动机运行可逆,调速范围D大于10。在电动机最低转速时,静差率不大于5%,加人转速微分负反馈后,电动机运行动态特性接近理想情况。关键词:直流调速 脉冲宽度调制 仿真ABSTRACTPWMDC PWMspeedcontrolsystem, tocontrolthecircuitasthecore, withconstantfrequencypulsewidthmodulation controlscheme, bySG3525,LM1413 andtwopulse transformer form generationanddrive SG3525generates apulsewidthmodulatedsignal asthedriving signalofIGBT, andthe 11,14 pinoutput signalbytheLM1413 amplification andthendriveIGBT,twoIGBT halfbridge type structure formedby themaincircuit, canberegardedas acombinationofa buckconverter and a boostconvertercircuit, which realizesnomotor running reversible, adjustablespeedrange ofDismorethan10. Atthelowest speedofmotor, thestaticerrorrate islessthan5%, the negativespeeddifferential feedback, dynamic characteristicsofthemotor running closeto theidealcaseKeywordDCspeed-regulatingsystem;pulseWidthModulation;simulation目 录摘 要 IABSTRACT II第一章绪论 I第二章 PWM控制直流调速系统主电路设计 -控制电路及励磁电路 -控制电路
娄猛毕业论文星期四 来自淘豆网www.taodocs.com转载请标明出处.