04 YZF-R6 SS KIT MAN1AL The Performance Edge for excellent riders 20XX YZF-R6 Kit Manual Please note: Please understand that these parts are not covered by the warranty. The manufacturer does not take any responsibility for problems caused by these parts. These kit parts are intended exclusively for racing purposes. You are strictly requested not to use them for use on public roads. The specifications and usage methods of these kit parts along with the contents of this manual are subject to change without notice for improvement. This manual has been written for persons having knowledge and experience in the field of motorcycles. Please refer to the service manual for information on part assembly and maintenance. 1 .Standard Specifications (SS spec.) Item Spec Engine type Liquid-cooled, 4-stroke, In-Line DOHC 4-valve Displacement cc Bore x stroke mm x mm Compression ratio - : 1 Valve timing (event angle) Intake Exhaust =105° =110° Squish height mm (minimum) Minimum valve x piston clearance Intake Exhaust = mm (minimum), 10° after exhaust top dead center = mm (minimum), 11° before exhaust top dead center Valve (tappet) clearance Intake Exhaust = ± mm = ± mm Throttle body 38EIS MIKUNI minimum bore = mm, throttle bore = mm Exhaust system 4-2-1 system, #1 -2, #3-4 exhaust pipe coupling Transmission Constant mesh type, 6 speeds Clutch Wet, multi-disk type Ignition system DC-CDI 2 Kit Parts 2-1 Basic Kit Set Contents Spark Plug Set (You can use STD SPARK PLUGS) Head Gasket (t = mm) Camshafts and Cam Sprockets Air Funnel Set (Bell Mouth Set) Air Filter Element Assembly AIS Plug Set Clutch Spring Set ACM Set ECU and Wire Harness Set Kit Manual CAUTION: Although those parts indicated with an asterisk (*) in the parts list are included in the kit set, when individual parts are required, they are available through the genera丨 parts sales channel. 2-2 E