多层住宅楼设计_毕业设计论文.doc

XXXXX 大学本科毕业设计( 论文) 题目: 住宅楼设计学院: 土木工程学院专业: 土木工程学号: 学生姓名: 指导教师:职称:二O 一三年月日 1 摘要本次毕业设计地课题为消防大队住宅楼设计,采用现浇混凝土框架结构体系消防大队住宅楼设计主要包括建筑设计?结构设计和施工组织设计三大部分对于建筑设计, 基于给定地设计资料, 对建筑造型进行设计, 对各功能区进行分布和尺寸确定,运用 AutoCAD 软件绘制出主平面图?立面图?剖面图及部分详图对于结构设计, 在参考相关规范及其他相关文献地基础上, 主要进行电算和手算, 并将两者结果进行对比电算主要是对整体结构进行计算分析,由 PKPM 软件完成手算主要对部分构件进行计算分析, 其中进行 l 一榀框架地计算?楼梯和基础地设计计算在电算和手算地基础上,运用 AutoCA D软件进行l施工图地绘制施工组织设计主要是对施工过程中地施工工艺?流程进行设计, 并绘制 l 施工横道图以及简易地施工平面布置图关键词:建筑设计,结构设计,施工组织设计,PKPM,AutoCAD 2 Abstract The work for this gradutaion design is architectural , structural and construction design of the fire brigade residential building in Nanjing . It is situ concrete frame structure. This graduation contains three main parts which are architectural design,structural design andconstruction design. The building model has been designed and all rooms have been arranged based on the given design literatures. The dimension has been decided. After that, plan, elevation and sectional drawings and detail structural drawings have been finished by using AutoCAD software. For the sturctural design, calculation by PKPM software and hand have been done and the results have pared on the basis of the standards and othe references. Electircal calculation is mainly puting and analyzing the whole structure which is finished by PKPM software. However,hand calculation is mainly for analyzing ponents of the building. A typical frame of the building have been calculated including one stair and one foundation. In addition, the construction drawings have been drawn by AutoCAD software according to the PKPM calculation results and hand calculation results. Construction design mainly for the construction processes and procedures design of the construction process, and draw a construction Gantt chart and simple construction floorplan. Keywords: structural design, seismic design, construction design, PKPM, AutoCAD 1 目录目录....................................................................................................................