下载此文档

无线遥控照明灯的设计与制作论文.doc


文档分类:通信/电子 | 页数:约26页 举报非法文档有奖
1/26
下载提示
  • 1.该资料是网友上传的,本站提供全文预览,预览什么样,下载就什么样。
  • 2.下载该文档所得收入归上传者、原创者。
  • 3.下载的文档,不会出现我们的网址水印。
1/26 下载此文档
文档列表 文档介绍
毕业设计(论文)
无线遥控照明灯的设计与制作
Design and made of wireless remote control lighting
班级级
学生姓名 学号
指导教师 职称
导师单位
论文提交日期
摘 要
本次设计电路主要分为两部分:发射电路和接收电路,其中发射电路主要是由:74HC00及外围电路构成的多谐振荡电路,并产生30~50kHz的振荡信号,经放大电路,由VT1驱动红外发光二极管发出红外遥控信号。同时RP可以对振荡频率进行细调,使电路工作在固定的频率。在接收电路中主要由一体化红外接收块SM0038对接收的红外信号进行接收、解调、放大,VT2反相后送入CD4013构成的一个双稳态电路,对信号进行状态翻转,送至VT3驱动继电器吸合或释放。
电路结构简单实用,容易制作,调试简单,成本低廉,元器件易于采购,用于进行单路遥控,适合于没有遥控装置的家用电器的遥控开关。
关键词:振荡;红外遥控;红外发射;红外接收
Abstract
The circuit is mainly divided into two parts: the transmitting circuit and the receiving circuit, the transmitting circuit is mainly composed of: 74HC00 and peripheral circuits consisting of multiple harmonic oscillation circuit, and generates a 30 ~ 50kHz oscillation signal, amplifying circuit, driven by VT1 infrared emitting diode emits infrared remote control signal. At the same time RP of oscillation are fine, so that the circuit operates at a fixed frequency. The receiving circuit is mainly composed of integrated infrared receiver block SM0038 for receiving infrared signals in the receiver, demodulation, amplification, VT2 reversed into the CD4013 constitute a bitable circuit, the signal is sent to the VT3 state turning, driving relay or release.
The circuit has the advantages of simple structure, easy manufacture, easy debugging, low cost, easy procurement of components, for single way remote control, remote control device for household electrical appliances remote control switch
Keyword: oscillations;infrared remote control; infrared emission;infrared receive
目 录
摘 要 I
ABSTRACT II
第一章 红外遥控系统概述 1
1
1
1
第二章 设计方案的论证 3
3
5
第三章 主要元器件的介绍 9
第四章 焊接 12
12
13
14
14
15
第五章

无线遥控照明灯的设计与制作论文 来自淘豆网www.taodocs.com转载请标明出处.

相关文档 更多>>
非法内容举报中心
文档信息
  • 页数26
  • 收藏数0 收藏
  • 顶次数0
  • 上传人rdwiirh
  • 文件大小3.48 MB
  • 时间2021-01-18