编号: 958
2008年全区电子制作大赛梧州学院赛区比赛
设计报告书
设计题目: (D1)波形发生器
参赛者姓名:
所在学院: 梧州学院
所在班级: 05级电子信息工程本科3班
竞赛时间:
波形发生器设计与总结报告
摘 要:本设计是基于信号发生芯片MAX038的多功能波形发生器。由MAX038、D\A转换,MAX414运算放大器、LCD12864显示、单片机以及外围电路构成的多波形发生器。利用MAX038产生正弦波、三角波、锯齿波、方波的波形,单片机通过D\A转换对MAX038的控制,从而实现频率和占空比的步进调控,在1Hz~、三角波、锯齿波和方波。 采用MAX414和TLC549构成信号放大采样电路,用液晶模块LCD12864可实现实时显示波形的类型、频率、幅度和占空比等功能;。经多次测试,本设计整机具有波形清晰,频率、相位和幅度相对稳定,没有明显的失真,采用键盘输入,LCD显示,操作显示界面简单直观,实现按步进进行调整。
关键词:单片机 MAX038 D\A转换 占空比 LCD12864
Waveform Generator
Abstract : The design is based on the signals in the chip-wave generator MAX038。This Multi-wave generator is make up of MAX038, D \ A conversion, MAX414 operational amplifiers, LCD12864, SCM and the external circuit. MAX038 is used to generate sine wave, triangle wave, sawtooth and square waveform, SCM through D \ A conversion of the control MAX038, thus realizing the frequency and duty cycle step-control, in the range of 1 Hz ~ generate any sine wave, the triangular wave, sawtooth and square wave。MAX414 and TLC549 are make up of signal amplification and sampling, with LCD module LCD12864 can achieve real-time display of the waveform type, frequency, magnitude and the function of duty cycle Etc。 It is proved to be well functioning ,the output of signal is clear , the frequency, phase and amplitude are comparative stability, there was no obviously distortion, Using keyboard input and LCD output,makes it has a Simple user interface , realize step-control.
Keyword: SCM MAX038 D/A converter Duty cycle LCD12864
目 录
系统设计……………………………………………………… 6
设计要求………………………………………………………………… 6
基本要求…………………………………………………………… 6
发挥部分…………………………………………………………… 6
总体设计方案……………………………………………………… 6
设计思路…………………………………………………………… 6
方案论证与比较………………………………………
波形发生器设计 来自淘豆网www.taodocs.com转载请标明出处.