GE Fanuc puter Numerical Control Products Series 16 i / 18 i / 21 i / 20 i / 160 i / 180 i / 210 i / 160 i s / 180 i s / 210 i s - Model A Connection Manual (Hardware) GFZ-63003EN/04 July 2000 -001 Warnings, Cautions, and Notes as Used in this Publication Warning Warning notices are used in this publication to emphasize that hazardous voltages, currents, temperatures, or other conditions that could cause personal injury exist in this equipment or may be associated with its use. In situations where inattention could cause either personal injury or damage to equipment, a Warning notice is used. Caution Caution notices are used where equipment might be damaged if care is not taken. Note Notes merely call attention to information that is especially significant to understanding and operating the equipment. This document is based on information available at the time of its publication. While efforts have been made to be accurate, the information contained herein does not purport to cover all details or variations in hardware or software, nor to provide for every possible contingency in connection with installation, operation, or maintenance. Features may be described herein which are not present in all hardware and software systems. GE Fanuc Automation assumes no obligation of notice to holders of this document with respect to changes subsequently made. GE Fanuc Automation makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of the information contained herein. No warranties of merchantability or fitness for purpose shall apply. ?Copyright 2000 GE Fanuc Automation North America, Inc. All Rights Reserved. –63003EN/04 DEFINITION OF WARNING, CAUTION, AND NOTE s–1 DEFINITION OF WARNING, CAUTION, AND NOTE This manual includes safety precautions for protecting the user and preventing damage to the machine. Precautions are classified into War
FANUC16i 18i 21i硬件连接手册 来自淘豆网www.taodocs.com转载请标明出处.