磁谐振式无线电能传输系统频率跟踪设计.doc

磁谐振式无线电能传输系统频率跟踪设计


该论文来源于网络，本站转载的论文均是优质论文，供学****和研究使用，文中立场与本网站无关，版权和著作权归原作者所有，如有不愿意被转载的情况，请通知我们删除已转载的信息，如果需要分享，请保留本段说明。
　　摘 要： 无线电能传输系统在传输过程中，针对系统失谐导致输出功率大大降低的问题，文章在Matlab/Simulink仿真庫搭建了一套能够自动进行频率跟踪反馈的磁谐振式无线传能仿真系统，并对高频逆变电路触发脉冲信号发生器进行了设计与改进，使系统能够在发射端实现电压电流接近同相位，从而使系统在收发端传输能量时，处于接近纯阻态特性，减小了谐振线圈之间的无功损耗，增加了系统传输效率。仿真数据表明，该系统能够实时对发射端电流进行检测，并通过数字锁相环电路的调节信号对高频逆变器进行调节，输出与发射端电流同相位的逆变电压，实时进行动态调节。
　　关键词： 频率跟踪; 无线电能传输; 系统设计; 磁耦合谐振; 触发脉冲信号; 无功流动
　　中图分类号： TN925?34; TM72 文献标识码： A 文章编号： 1004?373X（2020）18?0080?05
　　Abstract： In the transmission process of the wireless energy transmission system， the output power of the system could reduce greatly if the detuning of the system. A wireless energy transmission simulation system with magnetic resonance type is constructed in the Matlab/Simulink simulation library， which can perform the frequency tracking and feedback automatically; and the trigger pulse signal generator of the high?frequency inverted circuit is designed and improved， which make system able to realize the voltage and current close to the same phase at the transmitting end， so that the system is close to the pure resistance state when the energy is transmitted from the receiving end to the sending end， so reduces the reactive power disslpation between the resonance coils and increases the transmission efficiency of the system. The simulation data show that the system can detect the current at the transmitting end in real time， adjust the high?frequency inverter by means of the adjustment signal of the digital phase?locked loop circuit and dynamic adjust it in real time， so as to realize the output of the inverter voltage with the same phase as the current at the transmitting end.
　　Keywords： frequency tracking; wireless power transmission; system design; magnetic coupled resonance; trigger pulse signal; reactive power flow
　　0 引 言
　　近些年来无线电能传输技术由于其巨大的技术优势而正在快速发展，它可以在一些特殊场