浅谈autoCAD的图片输出方式.docx在AutoCAD中输出图片方式浅谈
由于工作需求,经常需要将
AutoCAD文件转换成图片插入到Word、Photoshop等应用软件中进行排版。但是前者是 矢量图,后者都是点阵图,该怎么办呢?本人经过多次探索,得到了一些经验,希望给大家 带来一些帮助。
方法主要有三种,分别介绍如下:
第一:截屏
相信地球人都能在键盘上找到Print Screen这个键,在AutoCAD当前窗口中按下这个键后, 打开画图板,编辑菜单下的粘贴就可以使用了。这样,AutoCAD中的图形就被转换成了图 片格式。
提示:Alt+Print Screen可以捕捉当前对话框的图形。
评定:此类方法图像大小受限于显卡分辨率。一般最大只能达到1280X1024o因此不太适 合分辨率要求高的产品,如产品样本。
第二种:直接输出BMP文件
在AutoCAD命令行中输入命令bmpout,系统将弹出-•个对话框,要求我们选择输出位置 和文件名称。
评定:该方法输出的图像质量较好,但是使用了微软的位图格式,图像文件偏大。
第三种:虚拟打印机
下面我们以AutoCAD2004为例,讲解整个流程。
首先我们在打印页面找到系统配置好的JPG打印机,在右下角选择好文件存放位置。然后 单击0K确认,系统将把生成的JPG文件保存到您所指定的位置。
若系统中没有该JPG打印机,则可按照以下步骤来添加该虚拟光栅打印机。
首先我们打开打印机管理选项。在文件(File) '打印机管理(Plotter Manager),如下图:
双击添加打印机向导(Add-A-PlotterWizard),
This wizard provides you with the ability to configure either an existing Windows system plotter, or a new non Windows system plotter. The configu<ation information will be saved in a PC3 file. The PC3 file wi be added as a plottei icon that can be selected from the Autodesk Plotter Manager.
You can choose to import configuration infocmation from a PCP or PC2 fie, then add that information to the new plotter configuration file you are creating.
也巫:』 Cancel
单击下一步(Next),系统出现下面的对话框。
选择我的电脑(My Computer),单击下一步(Next),如下对话框出现。
Add Plotter - Plotter Model
Begin
.Plotter Model
Import Pep or Pc2
Poets
Plotter Name
Finish
Select your plotter manufacturer and model If your plover is
浅谈autoCAD的图片输出方式 来自淘豆网www.taodocs.com转载请标明出处.