下载此文档

机械制造技术课程设计-轴承盖加工工艺及铣两侧平面夹具夹具设计(全套图纸) ..pdf


文档分类:汽车/机械/制造 | 页数:约21页 举报非法文档有奖
1/21
下载提示
  • 1.该资料是网友上传的,本站提供全文预览,预览什么样,下载就什么样。
  • 2.下载该文档所得收入归上传者、原创者。
  • 3.下载的文档,不会出现我们的网址水印。
1/21 下载此文档
文档列表 文档介绍
摘 要

工艺学是以研究机械加工工艺技术和夹具设计为主技术学科,具有很强的实践性,要求
学****过程中应紧密联系生产实践,同时它又具有很强的综合性,
本次毕业设计的课题是轴承盖加工工艺规程及夹具设计主要内容如下:
首先,对零件进行分析,主要是零件作用的分析和工艺分析,通过零件分析可以了解零
件的基本情况,而工艺分析可以知道零件的加工表面和加工要求。根据零件图提出的加工要
求,确定毛坯的制造形式和尺寸的确定。
第二步,进行基面的选择,确定加工过程中的粗基准和精基准。根据选好的基准,制订
工艺路线,通常制订两种以上的工艺路线,通过工艺方案的比较与分析,再选择可以使零件
的几何形状、尺寸精度及位置精度等技术要求得到合理的保证的一种工序。
最后,根据已经选定的工序路线,确定每一步的切削用量及基本工时,并选择合适的机
床和刀夹具。对于粗加工,还要校核机床功率。然后把设计的过程整理为图纸。
通过以上的概述,整个设计基本完成。
关键词: 机械;加工工艺;夹具设计



全套图纸,加 153893706
ABSTRACT

A specialized main specialized course that " mechanical manufacturing
engineering is studied " is machinery , rely mainly on studying machining technology
and jig to design technological discipline , have very strong practicality , require
that should contact production practices closely in the learning process, at the same
time it has comprehensive the very strong one,
The subject of this graduation project is that CA6140 lathe ring flange processing
technology rules and special-purpose jig of a certain process are designed, the main
content is as follows:
First of all, analyse , it is mainly analysis of the function of the part and
craft analysis to the part , through part analyse can find out about basic situation
of part, and craft analyse may know the processing surface of the part and is it require
to process. The processing demand put forward according to the part picture, confirm
the manufacture form of the blank and sureness of the size.
The second step, carry on the choice the base , confirm thick datum and precise
datum in the processing course. According to the datum chosen , make the craft route ,
usually make the craft route of more than two kinds, with analysing through the
comparison of the craft scheme, and

机械制造技术课程设计-轴承盖加工工艺及铣两侧平面夹具夹具设计(全套图纸) . 来自淘豆网www.taodocs.com转载请标明出处.

非法内容举报中心
文档信息
  • 页数21
  • 收藏数0 收藏
  • 顶次数0
  • 上传人endfrs
  • 文件大小251 KB
  • 时间2021-06-21