IE BootCamp3.0(第八章).docx

IE_BootCamp3.0(第八章)Cisco认证实验考试经典题库
（ 第八章）
bgp configuration T5Pts (1h)
place router r4 in bgp as 1 and router r3 in bgp as 2.
create two static routes to null。using a class a address with a
24-bit mask on r4 and inject into bgp such that router r3 can see it. use loopbacks as the update source on both routers r3 and r4. create loopback interface as necessary.
filter one of the static routes with a route-map statement on router r4.
configure bgp on router r4 such that the sub-netted class a route is seen. for example, the bgp route on router r3 could be not .
configure a second loopback interface on router r4 at
.1/24 and enable rip on this router for this network. inject this route and the previous one with a metric of 5.
configure router r2, r1, and r5 in bgp as3. use only one neighbor remote-as x statement on routers r2 and r5.
create a static route on router r2 (ip route
null。)inject this route into bgp. make sure the
other routers running bgp can see this route.
also make sure all routers can ping .
you have completed lab 4 compare your configurations to
the ones we provided. often there is more than one to complete a task so your configuration may be different than ours. if your configuration are different than ours make sure
you understand how to complete the lab with our configurations too
lab5