2021 Altair 技术大会论文集 基于 Feko 和 PollEx 软件的 PCB 板辐射发射仿真 Radiation Emission Simulation of PCB Based on Feko and PollEx Software 樊晓冬 1 李康宁 2 (,太原 030006;(上海)有限公司,北 京 100020) 摘 要: PCB(Printed circuit board)作为信息设备中的重要电气模块,其电磁辐射分 布对系统的电磁兼容有重要影响。由于 PCB 电路结构日益复杂,将 PCB 考虑在内的电磁兼容 分析难度较大,因此学者们提出了各种 PCB 的等效模型用于系统电磁兼容的分析。本文基于 Altair FekoTM 和 Altair PollExTM 对 PCB 板的辐射场进行了仿真。首先利用 PollEx 生成代表 PCB 走线电流的*.rei 文件,之后 Feko 通过自带的宏命令将*.rei 文件预处理为解系数源 *.sol 文件(Solution Coefficient Source),最后通过 EDITFEKO 中的 AM 卡将*.sol 文件 作为工程的等效辐射发射源,从而计算其辐射场。 关键词: Altair FekoTM Altair PollExTM *.rei 文件 *.sol 文件 Abstract: As an important electrical module in information equipment, PCB’s electromagnetic radiation distribution has an significant impact on the electromagnetic compatibility of the system. Due to the increasing complexity of PCB circuit structure, it is difficult to take PCB into account in EMC analysis, therefore scholars proposed various equivalent models of PCB for EMC analysis. In this paper, the radiation field of PCB is simulated based on Altair FekoTM and Altair PollExTM. Firstly, PollEx is used t