下载此文档

航空用钛合金的发展概况.doc


文档分类:行业资料 | 页数:约14页 举报非法文档有奖
1/14
下载提示
  • 1.该资料是网友上传的,本站提供全文预览,预览什么样,下载就什么样。
  • 2.下载该文档所得收入归上传者、原创者。
  • 3.下载的文档,不会出现我们的网址水印。
1/14 下载此文档
文档列表 文档介绍
航空用钛合金的发展概况
several group number, then with b ± a, =c,c is is methyl b two vertical box between of accurate sizroup number, then with b ± a, =c,c is is methyl b two vertical box between of accurate size. Per-2~3 measurement, such as proceeds of c values are equal and equal to the design value, then the vertical installation accurate. For example a, b, and c valueswhile on horizontal vertical errors for measurement, General in iron angle code bit at measurement level points grid errors, specific method is from baseline to methyl vertical box center line distance for a,, to b vertical box distance for b, list can measured
several group number, then with b ± a, =c,c is is methyl b two vertical box between of accurate size. Per-2~3 measurement, such as proceeds of c values are equal and equal to the design value, then the vertical installation accurate. For example a, b, and c valueswhile on horizontal vertical errors for measurement, General in iron angle code bit at measurement level points grid errors, specific method is from baseline to methyl vertical box center line distance for a,, to b vertical box distance for b, list can measured
several group number, then with b ± a, =c,c is is methyl b two vertical box between of accurate size. Per-2~3 measurement, such as proceeds of c values are equal and equal to the design value, then the vertical installation accurate. For example a, b, and c valueswhile on horizontal vertical errors for measurement, General in iron angle code bit at measurement level points grid errors, specific method is from baseline to methyl vertical box center line distance for a,, to b vertical box distance for b, list can measured
用量不断扩大。F/A-18在不断改型的过程中其钛用量也不断增多。
  民用飞机的钛用量也在不断扩大(图1和表3)。
  我国战斗机的钛用量也在不断扩大:20世纪80年代开始服役的歼八系列的钛用量为2%,两种新一代战斗机的钛用量分别为4%和15%,更新一代的高性能新型战斗机的钛用量将达25%~30%。
  2. 航空发动机的钛用量
  从表4和图2可知,国外先进发动机上的钛用量通常保持在20%~35%的水平。
  我国早期生产的涡喷发动机均不用钛,1978年开始研制并于1988年初设计定型的涡喷13发动机的钛用量达到13%。2002年设计定型的昆仑涡喷发动机是我国第一个拥有完全自主知识产权的航空发

航空用钛合金的发展概况 来自淘豆网www.taodocs.com转载请标明出处.

相关文档 更多>>
非法内容举报中心
文档信息
  • 页数14
  • 收藏数0 收藏
  • 顶次数0
  • 上传人玉玲珑
  • 文件大小2.23 MB
  • 时间2022-01-24