HALOGEN FREE低烟无卤电缆培训 WELCOME at GLT SEMINAR 2002-02-20 Rhode Island Club, USA2001-01-01 Volendam, NL 2000-11-11 60684-2 Fluorine content ≤ 0,1% ***含量 accept material Test Standards测试标准 Corrosivity of Combustion Gases 燃烧气体的腐蚀性 DIN VDE 0482 part 267 2-2, EN 50267-2-2, IEC 60754-2 and HD 602 Insulation and jacket materials are to be put in the moveable furnace, pre-heated to 750 to 800°C. The burning gas is conducted through two gas-washing bottles. The test shall be regarded as passed when the measured conductivity is ≤ 10 µS/mm. During this test all the not desired components of the materials are precipitated such as all halogens, sulphur and nitrogen. The corrosion test of gases caused by fire is carried out to the test materials, not the complete cable samples 将绝缘和护套材料放入移动烤箱中预热至750℃到800 ℃。将燃烧气体导至两个洗气瓶。当测到导电率≤ 10 µS/mm时测试认为通过。测试过程中,材料中所有无要求的元素会沉淀,如所有卤素,硫和氮。由燃烧产生的腐蚀性气体的测试只针对测试材料而非整个电线样品。 Tube Furnace – Drawing烤箱管道 图 Measuring of Corrosivity腐蚀性测量 Tube Furnace The presence of Halogen components will be detected in smallest quantities The sample of insulation or jacket material is in the silica tube, on a combustion boat 出现的卤素成分将取最小量测量 绝缘或护套材料样品放入二氧化硅试管中,置于燃烧皿上 Air Entry and Tube for Furnacesynthetic air, speed rate 1l / min Furnace with Entry and Exit Tube Furnace Washing Bottle Gas Washing Bottles Result of Test Halogens and Test Standards卤素和测试标准 Halogen content of HCL und HBr of insulation: 绝缘材料中卤素:***化氢和溴化氢的含量 EN 50267-2-1 (VDE 482 Teil 267-2-1): max 0,5% Fluorine HF of insulation: 绝缘材料中:***化氢EN 60684-2 (VDE 0341 Teil 2): max 0,1 % HCL and HBr of sheath: 护套材料中:***化氢和溴化氢EN 50267-2-1 (VDE 482 Teil 267-2-1): max 0,5% Fluorine HF of sheath:护套材料中:***化氢 EN 60684-2 (VDE 0341 Teil 2): max 0,1 % LSF LSHF / LSZH There are many terms used to describe a cable‘s behavior during a fire. Most deal with the level of smoke and poisonous fumes