数控机床招标书常见格式三
several group number, then with b ± a, =c,c is is methyl b two vertical box between of accurate si
P(X、Y、Z、U、V)≤5μm;
PS(X、Y、Z、U、V)≤4μm;
U(X、U)≤4μm;
U(Y、Z、V)≤2μm 。
*5.粗糙度:
加工钢材的粗糙度:Ra≤;
加工硬质合金的粗糙度Ra≤;
*6.电极丝直径:— mm
*:≥280mm2 /min
8.能在以下环境下工作:
(1) 在温度5~40℃、相对湿度≤90%能安全可靠地工作,并对其它环境无要求,能适应中国供电电网标准(电压380V,-10%—+15%,频率50HZ。满足不了的卖方自备电源,费用含在总价中)
(2) 能符合国际CE标准,IEC安全规程
9.承诺CNC系统2000年问题及使用时间常数设置问题
五、 设备配置:
1.所有轴具备碰撞保护功能
2.配备电火花线切割专业加工工艺的专家系统
3.自动消电离调节系统
4.放电介质自动温度控制
5.自动穿丝和自动再穿丝功能
several group number, then with b ± a, =c,c is is methyl b two vertical box between of accurate size. Per-2~3 measurement, such as proceeds of c values are equal and equal to the design value, then the vertical installation accurate. For example a, b, and c valueswhile on horizontal vertical errors for measurement, General in iron angle code bit at measurement level points grid errors, specific method is from baseline to methyl vertical box center line distance for a,, to b vertical box distance for b, list can measured
several group number, then with b ± a, =c,c is is methyl b two vertical box between of accurate size. Per-2~3 measurement, such as proceeds of c values are equal and equal to the design value, then the vertical installation accurate. For example a, b, and c valueswhile on horizonta
数控机床招标书常见格式三 来自淘豆网www.taodocs.com转载请标明出处.