最全的人力资源系统解答.doc

220kV金都变电站四通一平工程于4月份开工，施工过程中正逢雨季。我项目部在工程量大、施工条件困难的情况下，在现场施工中采用大型机械，高速高效的满足工期的需要。button. Select [login rule] button above情况下，在现场施工中采用大型机械，高速高效的满足工期的需要。button. Select [login rule] button above the [rule number] menu under ... Then open the barcode generator for the barcode002 part of the Properties dialog box, click the [factor/control] button in the destination edit box,Open the barcode generator for the barcode003 part of the Properties window, click the [factor/control] button, and then at the destination use the Ctrl + v, to enter into the well on the 2nd floor you just copied right 2nd truck name (example PART_STORE_00099), then click on [OK] button. Open 2 right up 3rd truck Properties window, use the ' Ctrl ' + ' c ' will [summary] property names are copied. Open the barcode generator for the barcode004 part of the pop-up menu in the property dialog box, click the [factor/control] button in the destination using the Ctrl + v, to enter copy 2 3rd truck name right (case of PART_STORE_00100), then click the [OK] button. Then use "Lesson3-" as the file name to save the other. Click on menu bar | simulation | start | or time column in the [start] button, you see the goods are put on the conveyor belt, and robotic loading pallets for through the pulley tracks were moved to the automatic tridimensional warehouse storage. If Tray 1 out of the library, select the tray popup menu [IOSection Library instructionmenu (1 layer). If the tray 2 out of the library, right-click with the mouse on the tray in the pop-up menu, select [IOSection Library instructionenu (2). From 2 out of the tray after it has been transferred to the transit point discharge, workers unloaded the goods. Empty tray again by rail back to automatic stereoscopic warehouse. Remove the cargo by conveyor belts was transferred to corresponding cage inside the vehicle. Note 1: simulation before the start, please set the environment for the 1th floor sections to be seen. Click the menu bar | Environment