备案号: DB 浙江省工程建设标准 DB33/Txxxx-2020 木结构工程施工质量验收检查用表标准 Standard of tables for acceptance and inspection of constru items 8 General items 10 Quality acceptance of inspection lot 12 Structures built with glulam 14 General requirements 14 Dominant items 14 General items 15 Quality acceptance of inspection lot 16 Light wood frame construction 18 General requirements 18 Dominant items 18 General items 20 Quality acceptance of inspection lot 22 Protection of wood structures 24 General requirements 24 Dominant items 24 General items 26 Quality acceptance of inspection lot 27 Quality acceptance of wood structures as a sub-project 29 Appendix A Testing of strength class of wood 30 Appendix B Standards of quality of rough sawn timber and round timber 31 Appendix C Testing of moisture content of wood 34 Appendix D Bending test of steel nails 35 Appendix E Allowable errors for manufacture and installation of wood structures 37 Appendix F Performance testing of wood members under bending 41 Appendix G Inspection and testing of quality and strength of dimesion lumber 45 Appendix H Properties of wood-based structural panel 53 Appendix J Requirements for nail connections in light wood frame construction by empirical design 55 Appendix K Requirements for retention and penetration of preservative-treated wood members 57 Explanation of wording in this standard 61 List of Quoted Standards 62 Addition: Explanation of Provisions 63 1总则 ,统一木结构工程施工质量验收的检查用表,保证工程施 工质量,制定本标准。 、胶合木结构、轻型木结构等木结构工程的施工质量验 收,并应与现行国家标准《木结构工程施工质量验收规范》GB 50206-2012配套使用。 ,除应执行本标准外,尚应符合现行国家、 行业和浙江省有关标准的规定。 2术语 方木、原木结构 rough sawn and round timber structure 承重构件由方木(含板材)或原木制作的结构。 胶合木结构 glued-laminated timber structure 承重构件由层板胶合木制作的结构。 轻型木结构 light wood frame construction 主要由规格材和木基结构板,并通过钉连接制作的剪力墙与横隔(楼盖、屋盖)所构成 的木结构,多用于1层〜3层房屋。 规格材 dimension lumber 由原木锯解成截面宽度和高度在一定范围内,尺寸系列化的锯材,并经干燥、刨光、定 级和标识后的