SIRFDEMO使用说明英文版.pdf

Getting Started 1
This chapter describes the PC requirements and step-by-step instructions to install the
GM-80/81/200 using Windows and Windows 95/98. In addition, it also explains how to
connect the GM-80/81/200 to your PC.
Requirements
PC, 486 or better, with at least 8 MB RAM with DOS () and Windows or
Windows 95/98 with one available m port (1, 2, 3 or 4).
Installing the Tool CD Application Software
This section describes installing the GM-80/81/200 software using:
• Microsoft Windows 95/98
• Microsoft Windows
• MS-DOS (SiRFdemo requires Windows or 95 for operation)
Note – The enclosed disk contains several large files. You may wish to only copy over
the \holux directory which contains the necessary tools and utilities for data collection
and analysis.
Using Microsoft Windows 95/98
1. Insert the CD into the CD-ROM.
2. Select the disk drive from puter.
3. Copy over the directories of interest to your hard drive.
Using Microsoft Windows
1. Using File manager, select the disk drive.
2. Copy over the directories of interest to your hard drive.
1
1
Using Microsoft DOS
1. At the DOS prompt, change to the disk drive
2. Copy over the directories of interest to your hard drive.
Table 2-1 Directory Structure of GM-80/81/200 disk
Sub Directory File Name Description
GM200\English\utility\ This user's manual.
\ SiRFdemo utility
\ SiRF map Protocol file
Quickstart 2
This chapter describes how to run the SiRFdemo software.
Note – If you want to run the SiRFdemo, you only need to install the software. You do
not need to connect the GM-200. If you want a more detailed explanation on how to
run the software, go to Chapter 3, “Setup.”
1. Double-click on the SiRFdemo icon. located in \holux
The Data Source Setup screen is displayed.
Note – The Serial Port and Baud Rate apply to the host PC (The GM-200 is set at a baud
rate of 4800 ,user c