灯具验货作业指导研讨.doc

Scope 范围 To define the standard inspection procedure for “ Lighting Chain ” and for client ’s approval or as an inspection reference to STR inspectors. It is used asa general guideline for inspection if clients have not defined their requirement. 本文定义了圣诞灯串标准验货程序,供客户确认或 STR 验货员的验货参考。如果客户没有特别的要求,在此定为通用的验货指南。 2. Inspection Criteria of Product / Package 产品/ 包装验货标准? Reference standard: 引用标准- EN60598-1 Luminaires – Part 1: General Requirements and tests EN60 598 -1 灯具第1部分:一般要求和试验- EN60598-2-20 Luminaires – Part 2: Particular requirements Section 20: Lighting Chain EN60335-2- 4 灯具-第2 部分: 特殊要求第 20 节: 灯串- UL 588 UL S tandard for Safety Seasonal and Holiday Decorative Products UL588 节假日灯饰 UL 安全标准? Product: 产品? Must be without any unsafe defect for using; 不允许有在实际使用中任何对使用者造成伤害的缺陷; ? Should be free of damaged, broken, scratch, crackle etc. Cosmetic / Aesthetics defect; 不应有任何损坏,破碎,擦伤,或碎裂等外观缺陷; ? Must be conform to the shipping market legal regulation / client ’s requirement; 必须符合销往国当地的法规以及客户的要求; ? The construction, appearance, cosmetics and material of all units ply with client ’s requirement / approved samples; 产品的结构,外观,材料等必须符合客户的要求或与样品保持一致; ? All units should have full plying with client ’s requirement / approved samples; 产品功能必须符合客户的要求或与样品保持一致; ? The marking / label on unit should be legal and clear. 产品上的标记/ 标签必须符合法规要求且清晰明确。? Package: 包装? All units will be adequately packaged, and construc