图书馆设计.doc

河北工业大学
毕业设计说明书
作者: 谢宗良学号: 121601
学院: 土木与交通学院
系(专业): 土木工程
题目: 秦皇岛市某高校图书馆设计

指导者: 王玲副教授
(姓名) (专业技术职务)
评阅者:
(姓名) (专业技术职务)
2016年 6月 6日
毕业设计(论文)中文摘要
秦皇岛市某高校图书馆设计
摘要:
本设计为高校图书馆设计,包含建筑设计和结构设计两部分内容。
建筑设计部分按照任务书要求、依据相关规范,对建筑平面、立面、剖面等进行了设计,利用天正建筑、CAD2008等制图软件进行绘制建筑平面图、立面图、剖面图及楼梯详图。最后明确了工程做法。
结构设计采用框架结构形式。在建筑设计的基础上初选各构件截面尺寸,并进行荷载统计。通过合理布置结构,利用PKPM建模,对Satwe参数设置进行分析并正确设置。然后对主体结构进行计算,根据计算结果对整体结构合理性进行判断分析,并对其进行优化调整。根据最终确定方案计算结果的配筋面积对各个构件进行配筋,利用天正建筑和CAD2008等对其配筋图进行绘制。最后对楼梯进行手算并绘制其配筋图。
关键词: 图书馆设计建筑设计结构设计框架结构
毕业设计(论文)外文摘要
Title This design for the library of an university of in
Qinhuangdao
Abstract
This design is the design of college library, including the two parts of the architectural design and structure design.
The architectural design part is according to the task book requirements, and in accordance with the relevant norms,to design the building plane, elevation, section I using the Tarch and cad2008 to draw building plans, elevation, sectional drawing and detail drawing of the end of this part,I determine the project measure.
Structure design using frame the basis of architectural design, the section size of each member is selected, and the load statistics are carried the reasonable arrangement of the structure, the use of PKPM modeling, Satwe parameter settings are analyzed and set up , the main structure is calculated, and the overall structure rationality is analyzed according to the calculated results, and the optimization and adjustment of the structure are carried out. According to finalize the program calculation results of reinforcement area of ponent of reinforcement,and the reinforcement plans were draw using Tarch and cad2008 etc. Finally, I calculated the stairs and drew its reinforcement diagram.
Keywords: Library design; architectural design; structure design;
Frame structure
目录
1 引言 - 1 -
2 工程概况 - 1 -
3 建筑设计 - 2 -
设计依据 - 2 -
平面设计 - 3 -
剖面设计 - 4 -
3