UE Functions and Interlayer Procedures in Connected Mode.doc
CWTS China Wireless munication Standard (CWTS); Working Group 1 (WG1); UE Functions and Interlayer Procedures in Connected Mode TS C003 (1999-10) Technical Specification Contents 1. SCOPE 5 2. REFERENCES 5 3. SYMBOLS AND ABBREVIATIONS 5 Symbols 5 Abbreviations 6 4. GENERAL DESCRIPTION OF CONNECTED MODE 9 5. DESCRIPTION OF UE STATES AND STATE TRANSITIONS 10 UE RRC States and State Transitions including GSM (PSTN / ISDN only) 10 UE RRC States and State Transitions including GSM / GPRS (IP only) 11 Transition from Idle Mode to Connecting State 12 Connecting State 12 Transition to Connected Mode 12 Transition to Idle Mode 12 Connected Mode States and Transitions 13 Cell Connected State 13 Control only substate 13 Transition from Control only substate to User data active substate 14 Transition from Control only substate to PCH 14 Transition from Control only substate to RRA connected state 14 Transition from Control only substate to Idle mode 14 User data active substate 14 from User data active substate to control only substate 14 from User data active substate to RACH + (USCH) / FACH or RACH + (USCH) / DSCH 15 from User data active substate to PCH 15 from User data active substate to RRA connected state 15 from User data active substate to Idle mode 15 between substates 15 from DCH/DCH to DCH/DCH+DSCH substate 15 Transition from DCH/DCH to DCH/DCH+DSCH substate occurs when DSCH is from DCH/DCH+DSCH to DCH/DCH substate 15 from DCH/DCH to DCH/DSCH+DSCH Ctrl substate 15 from DCH/DSCH+DSCH Ctrl to DCH/DCH substate 16 from DCH/DCH+DSCH to DCH/DSCH+DSCH Ctrl substate 16
UE Functions and Interlayer Procedures in Connected Mode 来自淘豆网www.taodocs.com转载请标明出处.