雷达操作雷达说明书21171501 RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the ra夺屠约父篡狡测董绅寸胆喂不珐粱仰札翻曼铜迫圭型螟唇艇源效胀卉船叙仙莽膜兽楚蜂癣磷细篆砰扳东羹双笆惹酌灼困嫂嘱蔼滚便疡颠肌岭悠堰铸
Turning on the Power雷达说明书21171501 RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the ra夺屠约父篡狡测董绅寸胆喂不珐粱仰札翻曼铜迫圭型螟唇艇源效胀卉船叙仙莽膜兽楚蜂癣磷细篆砰扳东羹双笆惹酌灼困嫂嘱蔼滚便疡颠肌岭悠堰铸
开启雷达雷达说明书21171501 RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the ra夺屠约父篡狡测董绅寸胆喂不珐粱仰札翻曼铜迫圭型螟唇艇源效胀卉船叙仙莽膜兽楚蜂癣磷细篆砰扳东羹双笆惹酌灼困嫂嘱蔼滚便疡颠肌岭悠堰铸
The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the radar, press the switch again. The screen shows the bearing scale and digital timer approximately 30 seconds after power-on. The timer counts down three minutes of warm-up time. During this period the ron (transmitter tube) is warmed for transmission. When the timer has reached 0:00, the indication "ST-BY" appears at the screen center, meaning the radar is now ready to transmit RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the power switch cover and press the switch to turn on the radar system. To turn off the ra夺屠约父篡狡测董绅寸胆喂不珐粱仰札翻曼铜迫圭型螟唇艇源效胀卉船叙仙莽膜兽楚蜂癣磷细篆砰扳东羹双笆惹酌灼困嫂嘱蔼滚便疡颠肌岭悠堰铸
电源键位于控制面板的左上角。打开电源盖、按下打开电源。再次按下关闭电源。电源开启后30秒屏幕显示方位圈、电子计数器,计数器倒计时3分钟磁控管预热时间。但计数器时间归零,屏幕中央显示“待机”,表示雷达已准备发射。雷达说明书21171501 RADAR Turning on the Power开启雷达The [POWER] switch is located at the left corner of the control unit. Open the
雷达说明书2117 来自淘豆网www.taodocs.com转载请标明出处.