Enkangmetalproductsco.,LTD攻牙作业指导书Tappingwi版次Rev:1filenumber/umber:NK-C-B-14-05-01-1生效日期/Effectivedate:2014-05-01适用机种/ModeAllthemodels工站名称Process攻牙tappingCustomernameHJ使用工具UseTools攻牙机Tappingmachine牙规Toothgauge物料Material名称/Name料号/(P/N)规格/Specification数量Quantity备注/,气压和供油正常。appingmachine,switchtonormalairpressureandoilsupplyisnormal2检查来料规格料号正确,外观无10厘米以上明显刮伤,无变形。ingmaterialSpecificationmaterialnumberiscorrect,looknomorethan10centimetersobviousscratch,nodeformation3将来料放入专用夹具中,定位放好,装好所需丝攻。,positioningandinstalledthescrewtapMakeworkpiecestackingandbesidethemachineauxiliarymachinecleaningwork4送料进行试产。生产至少5PCS,确认生产无异常。做好工件定位,丝攻和供油到位,,pletestheworkpiecepositioning,screwtapandoilinplace,firstinspectionnoticegoodqualitystaff生产顺畅;工件首检合格。Productionflow;,进行连续作业进行生产。操作人员随机抽检,每30个至少检查一次,发现不良及时停机确认。Artifactsanddeterminewellplaced,conti
中英文生产作业指导书 来自淘豆网www.taodocs.com转载请标明出处.