CIBSE Guide F - Energy Efficiency in Buildings 2nd Edition 2004.pdf

Energy efficiency in
buildings
CIBSE Guide F
Energy efficiency in
buildings
CIBSE Guide F
CIBSE Guide F: Energy efficiency in buildings
Page 5-10: Table : column 2, column heading should read ‘Density at 15 °C / kg·m–3’; units
for gross calorific value calorific value should be megajoules per kilogram (MJ·kg–1),
not megajoules per cubic metre (MJ·m–3


Page 7-11: Table : Table caption should read ‘Air handling benchmarks for conditioned
offices'.
Page 10-7: Section British Standard referred to in the second bullet point
should read BS 5422, not 5442.
CORRIGENDUM (CIBSE Guide F)
The following table replaces Table on page 5-10
Table Key properties of typical petroleum fuels
Fuel Property
Density at 15 °C Kinematic Kinematic Gross calorific
/ kg·m–3 viscosity at viscosity at value / MJ·kg–1 value / MJ·kg–1
40 ºC / mm2·s–1 100 ºC / mm2·s–1
Class C2 803 to —
Class D 850 to —
Class E 940 —≤
Class F 970 —≤
Class G 980 —≤
CIBSE: correction issued June 2004
The rights of publication or translation are reserved.
No part of this publication may be reproduced, stored in a
retrieval system or transmitted in any form or by any means
without the prior permission of the Institution.
© Second edition January 2004 The Chartered Institution of
Building Services Engineers London
Registered charity number 278104
ISBN 1 903287 34 0
This document is based on the best knowledge available at
the time of publication. However no responsibility of any
kind for any injury, death, loss, damage or delay however
caused resulting from the use of these mendations can
be accepted by the Chartered Institution of Building Services
Engineers, the authors or others involved in its publication.
In adopting these mendations for use each adopter by
doing so agrees to accept full responsibility for any personal
injury, death, loss, dama