Ansys 10.0 Workbench Tutorial - Exercise 1, Workbench Basics.pdf

ANSYSANSYS EDED
WorkbenchWorkbench TutorialTutorial
ANSYSANSYS
WorkbenchWorkbench
BasicsBasics
© 2006 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
UsingUsing thisthis TutorialTutorial
The following guidelines are provided when
taking the tutorial
Green boxes are Blue boxes Orange boxes
guides represent actions present
describing to be taken. warnings or
various When numbered notes of
Workbench they guide you interest or
features but through the importance
requiring no sequence of the
action on your actions
part
© 2006 ANSYS, Inc. All rights reserved. 2 ANSYS, Inc. Proprietary
GettingGetting StartedStarted
Launch the ANSYS Workbench
© 2006 ANSYS, Inc. All rights reserved. 3 ANSYS, Inc. Proprietary
OpenOpen anan EmptyEmpty ProjectProject
Open an empty project by selecting the
“Empty Project” Icon with the left
mouse button
© 2006 ANSYS, Inc. All rights reserved. 4 ANSYS, Inc. Proprietary
CreatingCreating initialinitial geometrygeometry
We will start this tutorial by creating a
new model using the ANSYS Workbench
DesignModeler
Create a new model by selecting “New
Geometry” using the left mouse button
© 2006 ANSYS, Inc. All rights reserved. 5 ANSYS, Inc. Proprietary
BuildingBuilding ourour initialinitial modelmodel
Select you modeling units (in this case
millimeters) and select OK with the left
mouse button
© 2006 ANSYS, Inc. All rights reserved. 6 ANSYS, Inc. Proprietary
ExerciseExercise 11 -- Outline Outline
• Rectangular Plate with a Uniform Pressure
Load
1. Create geometry
2. Apply constraints
3. Apply pressure load
4. Define required results
5. Solve
6. Examine Results
7. Generate Report
© 2006 ANSYS, Inc. All rights reserved. 7 ANSYS, Inc. Proprietary
StepStep 1A1A –– Create Create RectangleRectangle
3. Select a starting point
(left mouse click – or
2. Select Rectangle from hold and drag)
the Draw Menu
1. Enter Sketching 4. Create Rectang