下载提示
- 1.该资料是网友上传的，本站提供全文预览，预览什么样，下载就什么样。
- 2.下载该文档所得收入归上传者、原创者。
- 3.下载的文档，不会出现我们的网址水印。
文档列表
文档介绍
苏泊尔电磁炉维修故障代码
actively carry out the law on civil air defense education, drawn out of the air defense in Pinglia defense in Pingliang city Building under easy fare, daily special inspection and regulation, overfulfilled the province upper and lower knots of up to 500,000 yuan fee collection tasks. 5, further standardize internal management, improve staff quality. Adhere to the
actively carry out the law on civil air defense education, drawn out of the air defense in Pingliang city Building under easy fare, daily special inspection and regulation, overfulfilled the province upper and lower knots of up to 500,000 yuan fee collection tasks. 5, further standardize internal management, improve staff quality. Adhere to the
续加热。传感器检测功能:当电磁炉检测到功率管传感器开路或短路时,显示E1,不输出功率;当电磁炉检测到炉面传感开路或短路时,显示E2,不输出功率.
那一撇、微笑 13级 2010-01-21
1--苏泊尔C19S04-A-TD0501T，开机后显E4：主板R256电阻470K开路。2--苏泊尔C21A01-TD0525T开机后无反应，查D902整流管击穿。3--苏泊尔C21S02用30秒后显示E2，测功率管温度传感器断路，更换后正常。4--苏泊尔19S01-。由原820K变为960K。--苏泊尔C19A01-B-TD0526T,开机后指示灯全亮一闪一闪的不能工作，查R8电阻240K断路。6--苏泊尔C21A01电磁炉开机后没有反应，查15V电压没有，查电源侧板2M启动电阻开路。7--苏泊尔C21S02-A(黑C)-TD0501CT，开机后显E1，查电阻R28阻值增大到1000K，实际上是820K，换后OK。8-苏泊尔C19S07-A-SDBS01-190,开机后灯亮不检锅有检锅声，查R51电阻470K增大为520K，换后OK。9-苏泊尔C16BS的电磁炉开机指示灯亮报警，不加热--R473和R551，阻值是32K和220K。32K换成24K。220K换成75K 10-苏泊尔C21S12-A出现间歇性加热，将4UF电容加到8UF后OK。或者把R55同步电阻180K输出脚割断直接用线引至J19输入
actively carry out the la
actively carry out the law on civil air defense education, drawn out of the air defense in Pinglia defense in Pingliang city Building under easy fare, daily special inspection and regulation, overfulfilled the province upper and lower knots of up to 500,000 yuan fee collection tasks. 5, further standardize internal management, improve staff quality. Adhere to the
actively carry out the law on civil air defense education, drawn out of the air defense in Pingliang city Building under easy fare, daily special inspection and regulation, overfulfilled the province upper and lower knots of up to 500,000 yuan fee collection tasks. 5, further standardize internal management, improve staff quality. Adhere to the
续加热。传感器检测功能:当电磁炉检测到功率管传感器开路或短路时,显示E1,不输出功率;当电磁炉检测到炉面传感开路或短路时,显示E2,不输出功率.
那一撇、微笑 13级 2010-01-21
1--苏泊尔C19S04-A-TD0501T，开机后显E4：主板R256电阻470K开路。2--苏泊尔C21A01-TD0525T开机后无反应，查D902整流管击穿。3--苏泊尔C21S02用30秒后显示E2，测功率管温度传感器断路，更换后正常。4--苏泊尔19S01-。由原820K变为960K。--苏泊尔C19A01-B-TD0526T,开机后指示灯全亮一闪一闪的不能工作，查R8电阻240K断路。6--苏泊尔C21A01电磁炉开机后没有反应，查15V电压没有，查电源侧板2M启动电阻开路。7--苏泊尔C21S02-A(黑C)-TD0501CT，开机后显E1，查电阻R28阻值增大到1000K，实际上是820K，换后OK。8-苏泊尔C19S07-A-SDBS01-190,开机后灯亮不检锅有检锅声，查R51电阻470K增大为520K，换后OK。9-苏泊尔C16BS的电磁炉开机指示灯亮报警，不加热--R473和R551，阻值是32K和220K。32K换成24K。220K换成75K 10-苏泊尔C21S12-A出现间歇性加热，将4UF电容加到8UF后OK。或者把R55同步电阻180K输出脚割断直接用线引至J19输入
actively carry out the la
苏泊尔电磁炉维修故障代码 来自淘豆网www.taodocs.com转载请标明出处.