7、5 系宝马保养归零(7, 5 line BMW maintenance Zero)
BMW series car maintenance zero, clock adjustment
Release date: 2010-12-05d:
IG ON (insert ignition key, press the ignition key seat left "START/STOP" key), press the zero button on the top left of the instrument, about 8 seconds after the release, at this time the instrument upper left area LCD screen will display as follows:
RETURN rollback
BR. FLUID 8MTHS brake fluid
ENG. OIL 30TKM engine oil 30 thousand km
40TKM front brake pads 40 thousand km
R. BRAKE 40TKM rear brake pad 40 thousand km
VEH. CHLK 50TKM body inspection 50 thousand km
MICROFIL 60TKM
SPKPLUGS 60TKM spark plugs 60 thousand km
COOLANT 32MTHS coolant
Note: when more than the specified number of kilometers or dates, the LCD central display area will display maintenance information, and when the meter is zero, the zero menu will show”!” Reminder. If the replacement of the front brake pads exceeds or fails to return, the Z/Fr. brake 40Tkm" will be displayed
Click and release the reset button (or by pressing the steering lamp switch on the BC two button), select "ENG. OIL 30TKM" of the engine oil return to zero after the project, and then hold the reset button on the right, until the meter display screen will display the following:
RETURN
RESET, ENGINE, OIL?
At this point, press the zeroing button to select "RESET ENGINE OIL"" And hold the zeroing button again until the screen shows "ENGINE OIL RESET OK”, and the oil maintenance light goes to zero. When re start, the instrument will instantly display "after-sales service 30000km"”.
Two 、 instrument test function program:
First, press the zeroing button on the top left of the instrument, insert the ignition key into the ignition lock, press the "START/STOP" button, and after a few seconds (KEY, ON), the left upper area of the instrument monitor will display the following 21 sets of test menus:
Identification shows the body VIN number,
Part number, factory date, engine cylinder numbe
75系宝马保养归零75lineBMWmaintenanceZero 来自淘豆网www.taodocs.com转载请标明出处.