ICEMCFD_2Set O grid
Click button “Split Block”
Click “Ogird Block” button
Select the
See the tree widget: Open Model>Parts>VORFN
Open the VORFN (A)
Using button to select in or attached the cylinder (B)(C)(D).
Using middle button to click “Apply”(E)
Close “VORFN” from the tree widget (F)
Click the “Reset”(G)
Mesh the edges
Click button “Set Curve Mesh Size”
Using button to select Curve(s):
Choose Method with “Element count”
Set the Number with 100 and click Apply.
See the tree: close the Model>Geometry>points, and the Model>Blocking>edges
Using right button to select Model>Geometry>Curves:
Curve Node Spacing (by using right button)
The same way set the “INLET” and “OUTLET” with number 100, the “SIDEA” and “SIDEB” with number 250.
Click button “Pre-Mesh Params”
Choose Blocking >Pre-Mesh Params
Click button “Update Sizes” and keep default,
Then click Apply
See tree open Model>Blocking>Pre_Mesh: Project faces (by using right button)
And we will see a menu
Click Yes.
Now we will see the mesh of the model.
Zoom it see the local part
Close Geomery>Points and curves, and Blocking>Edges.
Then open File>Mesh>Load from Blocking
Open File>Mesh>Save Mesh As…: and set the name with “cylinder_2d”
Open File>Blocking>Save Blocking As…: Save block with the name “cylinder_2d”
Check the quality of the mesh
Click button “Display Mesh Quality”
Click Apply
We can see no negatives mesh.
Extrude mesh
Click button “Extrude Mesh”
Use to select Elements:
Method 1
Click button “Select items in a part” and a menu appears:
Click “All” and “Accept”
Method 2
Put the left button and drag it to select all the regions (A)(C). Click middle button to accept (B)
Give the New volume part name “FLUID2D”, new side part name “SIDE”, new top par name “TOP”
And set the Spacing type>spacing with “”, then Apply
So the mesh change a height in the Z direction (D)
Box Zoom
Click button “Shaded Full Display”(E)(F)
Check the qual
ICEMCFD 2 来自淘豆网www.taodocs.com转载请标明出处.