西格玛泰克说明书.docx

C-DIAS PROCESSOR MODULE
CCP 521
C-DIAS Processor Module
P 521 processor module runs the control program and thereby represents an ponent of an automation system. The internal DC/DC converter powers all modules on a C-DIAS module carrier. The VAR
AN bus, the CAN bus, an interface or the USB device (Mini USB) can be used as the online interface connection. A 7-segment display and 2 status LEDs provide information on the actual status of the CPU. For program updates, the integrated USB Host interface can be used (USB stick, keyboard). With help from the exchangeable SD card, the entire control program can be easily exchanged. P 521 processor module is designed to be mounted in the control .
CCP 521
pletely patible. P 521 works with standard PC BIOS and therefore no SIGMATEK-specific BIOS is needed; the LASAL operating system in provided.

Page 1
CCP 521
C-DIAS PROCESSOR MODULE
Technical Data
Performance data
Processor Addressable I/O/P modules EDGE-Technology patible VARAN bus: 65,280 CAN bus: 32 C-DIAS bus: 8 No 32-kbyte L1 Cache 256-kbyte L2 Cache AMI 64 Mbytes 512 Kbytes 1-Gbyte micro SD card 1 x USB Host (full speed 12 Mbit/s) 1 x USB Device 1 x 1 x CAN 1 x VARAN 1 x C-DIAS Yes Yes Yes Yes (buffering approximately 10 days)
Internal I/O Internal cache BIOS Internal program and data memory (DDR2 RAM) Internal remnant data memory Internal storage device (IDE) Interface connections
Data buffer Status display Status LEDs Real-time clock
Page 2 a

C-DIAS PROCESSOR MODULE Electrical requirements
Supply voltage Current consumption of (+24 V) power supply Starting current Power supply on the C-DIAS bus Current load on C-DIAS bus (power supply for I/O/P modules). Typically 150 mA +18 – 30 V DC
CCP 521
Maximum 500 mA
For a very short time (~20 ms) : 30 A Supplied by P 521 Maximum A
Standard configuration
1 CAN bus IP: Station: 00 -Mask: Baud rate: 01 = 500 kBaud
Problems can arise if a control i