毕业设计任务书
电子工程系电子信息工程专业
设计题目 99-0的倒计时
学生姓名
班级信息0701班
起止日期2009年12月---2010年5月
指导教师
发任务书日期 2009年11月10日
:
1、 DC24V-5V
2、计数时间100ms
3、 AT89C51
4、 12MHZ
5、 200欧姆的电阻
6、 99-0
(论文)的内容和要求(包括技术要求、图表要求以及工作要求等):
1、运用所学的数字电子知识,和模拟电子知识进行电路设计。
2、设计出的直流电源要求输出精度高, 左右,调整方便。
3、使用通用器件。
4、要求输出电压在0~。
:
1、毕业设计任务书;
2、毕业论文正文打印稿;
3、毕业论文电子稿;
4、教师评语。
:
1、:北京航天航空出版社,
2、,
3、:天津大学出版社,
4、:北京航天航空出版社,
5、徐惠民、
6、 ,
7、单片机试验教程。北京:北京航空航天出版社,
8、诚志强、
教师评语
摘要
摘要:来随着计算机在社会领域的渗透,单片机的应用正在不断地走向深入,同时带动传统控制检测日新月益更新。在实时检测和自动控制的单片机应用系统中,单片机往往是作为一个核心部件来使用,仅单片机方面知识是不够的,还应根据具体硬件结构,以及针对具体应用对象特点的软件结合,以作完善。
模拟多通道压力系统是利用压力传感器采集当前压力并放映在显示器上,它可以分析压力过量程,并发出报警。并采用电子秤原理可根据输入单价准确的计算出物体的金额。本篇论文讨论了简单的倒计时器的设计与制作,对于倒计时器中的LED数码显示器来说,我为了简化线路、降低成本,采用以软件为主的接口方法,即不使用专门的硬件译码器,而采用软件程序进行译码。
关键词:单片机;AT89C51;LED数码管显示器;keil C;晶体振荡器
Abstract: in the social realm along with the calculator in recent years,single slice the application of the machine just at constantly alignment thorough,arouse a traditional control an examination a day a new moon benefit renewal in the solidly application the system,slice machine usually Be a core parts to use,only single slice the machine aspect knowledge is not enough,return should according to concrete the hardware structure,and aim at concrere application the sofwatre of the object bine to make perfect.
Imitating many passage pressure systemses is to make use of presure to spread the feeling machine to collect current bine the reflection is on tne display,it can analyze the pressure surfeit distance,erupting to report to the bine the adoption electronics steelyard principle can according to input the amount of money people’s methdo,do not use specialized to translate the code machine namely,but
毕业设计(论文)-基于单片机倒计时系统 来自淘豆网www.taodocs.com转载请标明出处.