测井作业英语100句
check the bridle 。
Change to a long electrode 。
Fill in the bridle with 。
Connect the bridle to the logging 。
Connect the cable head with the 。
Disconnect the 。
Which cable conductor has low dielectric strength?几号电缆绝缘低?
How many ohms does it read?有多少欧姆?
Connect the tools 。
Connect the tools at the well 。
Connect the tools with a 。
Start to make before-logging 。
Put the r calibrating jig on to the 。
Make a calibration for GR tool. 做GR仪器刻度。
Make sure that the position is 。
Take the calibrator a bit 。
Put on the large caliper 。
Put the tool on the high 。
Take down the 。
Fill in the calibration tube with 。
Add some detergent into 。
The connection is no good. tighten the thread a little bit.
接触不好,再把丝扣紧一紧。
Put the surface electrode into the mud 。
Lift up the upper 。
Lift the sheave a bit 。
Make sure that the floor chain is 。
Stretch the cable tight when pulling it to the well head.
放电缆时要拉紧电缆。
Hand me the spanner wrench, 。
There’s something wrong with this tool, change it for another one.
这支仪器有问题,换另一支仪器。
Hold
测井英语 来自淘豆网www.taodocs.com转载请标明出处.