ASTM A36M－2004 结构碳钢的标准规范.pdf

Designation: A 36/A 36M – 04
Standard Specification for
Carbon Structural Steel1
This standard is issued under the fixed designation A 36/A 36M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope* A 6/A 6M Specification for General Requirements for
This specification2 covers carbon steel shapes, plates, Rolled Structural Steel Bars, Plates, Shapes, and Sheet
and bars of structural quality for use in riveted, bolted, or Piling
welded construction of bridges and buildings, and for general A 27/A 27M Specification for Steel Castings, Carbon, for
structural purposes. General Application
Supplementary requirements are provided for use where A 307 Specification for Carbon Steel Bolts and Studs,
additional testing or additional restrictions are required by the 60 000 psi Tensile Strength
purchaser. Such requirements apply only when specified in the A 325 Specification for High-Strength Bolts for Structural
purchase order. Steel Joints
When the steel is to be welded, a welding procedure A 325M Specification for High-Stren