OREGON™ series
200, 300, 400t, 400c, 400i, 550, 550t
quick start manual
See the Important Safety and To install the batteries:
Product Information guide in 1. Lift the latch and remove the
the product box for product battery cover.
warnings and other important 2. Insert the batteries, observing
information. polarity.
Oregon units operate on two AA 3. Replace the battery cover and
batteries. Use alkaline, NiMH, or push the latch down.
lithium batteries. Use precharged
To select the battery type:
NiMH or lithium batteries for 1. Touch Setup > System >
best results. Standard alkaline Battery Type.
batteries are not mended 2. Select Alkaline, Lithium, or
for Oregon 550 units when using NiMH.
the camera feature.
Oregon Series Quick Start Manual
CAUTION: Remove batteries To acquire GPS satellite
when you do not plan to use signals:
the Oregon for several months. 1. Go outdoors to an open area,
Stored data is not lost when away from tall buildings and
batteries are removed. trees.
2. Turn on the Oregon. Acquiring
To turn the Oregon on or off:
satellite signals can take a few
1. To turn on the Oregon, press
minutes.
.
2. To turn off the Oregon, press The bars on the Main
and hold . page indicate satellite strength.
When the bars are green, the
To adjust the backlight level: Oregon has acquired satellite
1. While the Or
QuickReferenceGuide 来自淘豆网www.taodocs.com转载请标明出处.