(Ebook - Free Energy) 50000 Vdc Power Supply.pdf

50,000 Volt DC Power Supply # 378
#379
Copyright 2003 Creative Science
These plans use the old Diode and Capacitor Method, Turn 120 vac. into 25,000 to 50,000 volts DC of
earth shaking power! Amperage depends on what size capacitors you use. The higher the micro farads of
the cap, the higher the amperage rating. Use an AC amperage meter on the input wire, once you find out
how much amperage the cap is rated at, use diodes 2 x’s higher that rating, Example: 200 uf x 360 v
photoflash capacitors will use about 3 to 4 amps max, so you will want to use diodes rated at 6 to 8 amps x
400 to 450 volts. If you exceed the rating you can cause a fire hazard or a cap or caps can blow up! Please
be careful. NOTICE! Use rubber gloves when working with high voltage, we are not responsible for
anything in these plans you build at your own risk!
+ + + +
115 VAC
Input
+ + + +
+
Output
3,500 vDC
-
= Diode + = Electrolytic capacitor
Cover
50,000 Volt DC Power Supply # 378
#379
Copyright 2003 Creative Science
Capacitor’s rated at 360 V x 200 uf, Diodes rated at 400 v x 6 amps
Optional: For higher amperages
you can use High power diodes
or rectifiers. 40 amp x 600 v
AC Amp Meter
Page 1
50,000 Volt DC Power Supply # 378
#379
Copyright 2003 Creative Science
WARNING: We are not responsaible for
anything in these plans you build at your own risk......
Be carefull high voltage can kill..... Use rubber gloves
and rubber shoes when working at anytime around
high voltage, it only takes one mistake and it's over
for you...
WARNING: Always Discharge capacitors before touching them.... use a stick with a high
amperage wire attached to one end then attach the other wire end to capacitor + side, then
touch the other end of the wire that's attached to the long dowel rod wood stick and touch the
Negative side of the capacitor it will short it self out not harming the capacitor, do not look into
spark it