330MW机组离心式一次风机变频改造
于全波
(国电宁夏石嘴山发电有限责任公司,宁夏 石嘴山 )
摘要:介绍了国电宁夏石嘴山发电有限责任公司4号炉离心式一次风机变频改造及应用情况,重点介绍了变频改造后的热工逻辑修改,并通过对比变频改造前后相同负荷下一次风机单耗及其他参数,得出一次风机变频改造后有效的降低一次风机电耗、减少了无功功率的消耗、提高了电机风机设备寿命的结论,为同类电厂锅炉一次风机变频改造进行了有益的尝试。
关键词:330MW机组 一次风机 变频改造 经济分析
Abstract:In this paper, we introduced the frequency converter transformation and application on primary air fan of the 4# boiler of the Ningxia GD ShiZuiSHan Power Co. Ltd. Especially, the modified thermal logic design was paid attention to. We also compared the main technical parameters and consumption before and after modification. The results showed that power and reactive power consumptions of the air fan were reduced and the service time was extended, which made this project become a helpful exploration and attempt of the air fan transducer reconstruction for domestic similar type boilers.
Key words: 330MW unit; primary air fan; frequency conversion transformation; economic analysis
引言
火电厂一次风机负载通常是按照满负荷工况下且带有一定裕量来选型的,而实际工作中一次风机大部分时间运行在非满负荷状态,不能在最佳性能工况下工作,风机效率偏低。通过入口导叶来调节一次风量,会造成大量的节流损失,入口导叶开度越小,节流损失越大,风机效率越低[1]。近十多年来,变频器已经广泛应用于交流电动机的速度控制,在风机、水泵、压缩机等机械上使用变频器,可以节约大量的电能。
1设备概况
国电宁夏石嘴山发电有限责任公司4台330MW机组锅炉为武汉锅炉厂生产制造的亚临界、一次中间再热、自然循环汽包炉,型号为WGZ1004/-2。锅炉一次风机是上海鼓风机厂生产的单吸双支撑后弯叶片高效离心式风机,型号为LY6-。该风机主要参数见表1[2]:
表1:一次风机各参数
名称
项目
单位
数值
备注
风机
型式
单吸双支撑后弯叶片高效离心式
西安热工院(成都光能电力机械厂)
风机轴功率903kW
型号
LY6-(改造后)
数量
台
2
330MW机组离心式一次风机变频改造 来自淘豆网www.taodocs.com转载请标明出处.