河北联合大学轻工学院
QINGGONG COLLEGE, HEBEI UNITED UNIVERSITY
毕业设计说明书
设计题目:设计年产 560 万吨炼钢生铁的炼铁厂
学生姓名:张旭阳
学 号: 201015091230
专业班级: 10 冶金 12 班
学 部:材料化工部
指导教师:闫亚坤 教授
2014 年 5 月 31 日
摘 要
摘 要
按照设计说明书的要求, 设计一座年产 560 万吨的炼钢生铁的炼铁厂。 该厂的高炉车间由 2 座有效容积 3446m3的高炉,车间布置形式采用半岛式布置。
高炉炼铁生产工艺流程主要包括六个系统: 高炉本体系统、 高炉车间原料系统、高炉送风系统、高炉喷煤系统、煤气除尘系统渣鉄处理系统。
其中高炉的炉衬设计方法采用的是均衡炉衬的方法, 根据不同的冶炼条件砌筑不同的砖。冷却方式:炉身部分采用板壁结合的方式炉腰部分采用凸台冷却壁;炉缸和炉底采用光面冷却壁和水冷炉底结构。
设计的热风炉采用传统改进型内燃式热风炉。蓄热式和燃烧室在同一炉壳内。这部分同时包括热风炉各种设备和阀门的选取计算。
上料系统采用的皮带机连续上料, 同时增加了皮带的速度和宽度, 满足高炉冶炼的要求。 炉顶装料设备采用串罐式无料钟炉顶装料。 喷吹系统增加了煤的数量,采用了单管路串罐式直接喷吹。煤气处理设备采用的是湿法除尘设备。
所涉及的计算有高炉和热风炉尺寸的计算、 高炉的物料平衡和热平衡计算以及热风炉风机的选择等。
本设计依据现有的经验结合国内外先进生产技术, 对设备及相应的参数进行选择并作了具体阐述和计算, 同时对高炉车间工艺布置作了比较详细的叙述, 并
绘制里高炉本体砌砖与冷却设备图、热风炉剖面图、高炉车间平面布置图、 高炉车间总剖面图四张图。
关键词 高炉 ; 热风炉 ; 湿法除尘 ; 工艺流 ; 布置
-I-
引言
Abstract
The design ’ s task is to build an iron-making plant, which has two blast furnaces and each capacity is 3446m3. The plant generates 5600,000 tons iron every year. There are seven chapters in the design.
The seven systems of the iron-making plant is follow: blast furnace system、 raw material system、blast air blowing system、fuel injecting system、 gas dust removal system、slag processing systems
The BF lining adopted equalization lining method and was made of alumina brick and chayote in upper of BF and all carbon brick in the bottom of cooling methods were batten wall style in shaft, boss-cooling stave in bosh, smooth cooling stave in hearth and water-cooling stave in bottom of hearth.
The air-stove was modified tradition style of internal combustion. The checker chamber and combustion chamber were in the same furnace shell and divided by heat insulation wall. And the combus
560吨高炉炼铁毕业设计说明书 来自淘豆网www.taodocs.com转载请标明出处.