(Ebooks) Diy - Woodwork - Plans - Timber Garden Shed - Part Ii.pdf

Black & Decker - Project CenterLoginPasswordGoPasswordReminderSearchGoDirections: Timber-frame Garden ShedIndex>Furnishings>Outdoor Wood Furnishings>Timber-frame Garden Shed>BUILDING THE TIMBER-FRAME GARDEN SHEDStep A: Build the Foundation & Floor Frame1. Excavate the building site and add a 4" layer pactible gravel. Tamp the gravel thoroughly, making sure it is . Cut three 4 × 4 treated timber skids at 120". Arrange and level the skids on the gravel bed, following the FLOOR FRAMING . Cut 2 × 6 rim joists at 120" and nine joists at 93". Mark the joist layout onto the rim joists, following the plan. Assemble the frame with 16d galv. common nails—be sure to check each joist for crowning and install it with the crowned edge . Set the floor frame on top of the skids and measure the diagonals to make sure it's square. Install joist clip angles at each joist along the two outer skids, using 1 1/2" joist hanger nails. Toenail each joist to the center skid with 16d galv. . Install the tongue-and-groove floor sheathing, starting with a full sheet at one corner of the frame. Use 8d galv. box nails driven every 6" along the edges and every 12" in the ...?DOC_ID= (1 of 10) [7/20/03 8:07:59 PM]AllBlack & Decker - Project CenterSecure the floor frame to the foundation skids with angles (outside skids) and toen